您要查找的是不是：
- high solid loading slurry 高固相含量浆料
- Concentrated suspension with high solid loading and low viscosity is required during colloidal forming processing. 胶态成型工艺要求制备高固相含量、低粘度的浓悬浮体。
- Thermal treatment is unfit for preparing high solid loading SiC suspensions because the increase of unformed SiO2 on SiC surface leads to coagulation of particles. 通过高温加热处理使粉体表面无定型SiO2含量大大增加，使用这种粉体制得的料浆易产生团聚，不利于颗粒的悬浮；
- It shows that at low shear rate, the rheological curves of modified SiC slurries can fit well with Sisco model, comparing with Quemada model, Krieger-Dougherty model can fit much better with modified SiC slurries at high solid loading. 对改性SiC浆料流变曲线进行拟合发现,改性SiC浆料在高固相含量下的流变特性符合Krieger-Dougherty模型,而在低剪切速率下,改性SiC浆料的流变特性接近于Sisco模型。
- It was found that higher solid loading of backwash water did not lead to lower permeability. 实验又发现废水含有较高的固体浓度并不代表它的滤速就会比较低。
- High solids loading pneumatic conveying of pulverized coal 高固气比状态下的粉煤气力输送
- Strontium ferrite is an important permanent magnetic material,but making the strontium ferrite slurry with high solid content and low viscosity is very difficult. 锶铁氧体是重要的永磁材料,但锶铁氧体粉体很难制备高固相含量、低粘度的浆料。
- high solid loading 高固相含量
- The results show that the kaolin slurry with high solid content can be prepared by anion or cationdispersant, the anion type system is alkaline while the cationtype system is acidic. 结果表明:采用阴、阳离子型分散剂均能制备高固含量的高岭土浆液,含阴离子型分散剂的高固含量高岭土浆液体系为阴离子型,体系环境为碱性;
- TIEGS Terry N.,WITTMER Dale E.Method of preparing a high solids content, low viscosity ceramic slurry[P].U.S.Patent (1994), Patent Number5456877. 陈大明;李斌太;杜林虎;等.;一种薄型氧化铝陶瓷坯片的成型方法及专用模具[P]
- High solid ferments and yeast lees contract to highlight textural qualities. 采用固体发和酵母分离技术提高酒的品质。
- A high solid, tin free, polishing antifouling with active biocides added. 高固含，不含锡的自抛光防污漆，含有活性生物杀菌剂。
- high solids loading 高固气比
- Improve solid load of hydroxyapatite slurry 提高浆料中羟基磷灰石的固相含量的研究
- Factors such as flocculants, surfactant, solid loading, hydraulic loading, sludge skimming method, the aerator power and temperature were investigated. 研究了絮凝剂、表面活性剂、固体负荷、水力负荷、刮泥方式、曝气机功率及温度等因素对低浓度剩余活性污泥涡凹气浮浓缩工艺的影响;
- And the solid loading accord with particulate fluidization in axial, in different radial, the solid distribution were also different. 固体相含率在轴向上符合散式流态化的规律,在不同的径向位置固含率是不同的。
- Using seeded emulsion polymerization, the high solid content, medium viscosity and stable polymer latex were prepared. 采用种子乳液聚合法,制备高固含量、中等粘度、稳定性好的聚合物乳液。
- Vinyl acetate and butyl acrylate as mixed monomer can be used to prepare high solid content water based white emulsion. 以醋酸乙烯及丙烯酸丁酯为混合单体来制备高固含量水基白乳胶。
- Two-components PU, high solid content, for base use, water resistance and good workability. 二液型,高固型份,打底用,耐水压,加工性优
- Preparation and performance of high solid acrylic polyurethane automotive coating are introduced. 介绍了高固体分丙烯酸汽车涂料的制备和性能。
