您要查找的是不是:
- high velocity flame spraying(HVFS) 高速火焰喷涂
- High Velocity Flame Spraying( HVFS ) 高速火焰喷涂(HVFS)
- high velocity flame spraying 高速火焰喷涂
- high velocity oxy - fuel flame spraying 超音速火焰喷涂
- High velocity oxy-fuel flame spraying 超音速火焰喷涂
- Thermodynamic Analysis for the Effect of Powder Structure on the Microstructure of High Velocity oxygen Flame Spraying Coating 粉末结构对反应超音速喷涂涂层组织影响的热力学分析
- The automatic high velocity arc spraying system was designed for remanufacturing the cylinder body of STYER engine. 采用该技术再制造的斯太尔发动机缸体性能优异,满足了使用要求。
- Xu B S, Liang X B, Ma S N.Study on a new designed gun for high velocity arc spraying[J].China Surface Engineering, 1998, 11 (3): 16-19. [6]徐滨士;梁秀兵;马世宁.;新型高速电弧喷涂枪的开发研究[J]
- High velocity arc spraying technology is a new technology developed on the basis of conventional arc spraying technology and a key technology in remanufacturing engineering. 摘要高速电弧喷涂技术是在传统电弧喷涂技术基础上发展起来的一项新技术,也是再制造工程的关键技术之一。
- Thecoating is made by using an oxy-acetylene flame spraying process. 涂层采用氧-乙炔火焰喷焊工艺制成。
- Air, gas or steam enters the separator at high velocity. 空气,气体或蒸汽以很高的速度进入分离器。
- ABSTRACT Cr3Cr2-NiCr coatings were prepared by high velocity oxy-fuel (HVOF).The effect of spraying parameters on adhesive strength and microstructure of coatings were investigated. 摘 要 本研究采用超音速火焰喷涂(HVOF)方法制备了Cr3C2-NiCr涂层,探讨了喷涂工艺参数对组织结构、涂层结合强度的影响;
- Ni-based and Co-based alloy coatings were made on the Q235 steel substrate by oxy-acetylene flame spraying and fusing. 采用氧乙炔火焰喷熔法在Q235钢表面制备了镍基和钴基合金涂层。
- A centrifuge is a device for whirling an object with a high velocity. 离心机是使物体作高速旋转的装置。
- Also, the valves may be damaged by the high velocity across the seats. 此外,通过阀座的高流量还可能损坏阀门。
- In order to enhance its wear resistance,the oxygen-ethyne flame spraying method was utilized to prepare the Co-based WC composite coating on the worn guide piece. 为提高导卫板的耐磨性,采用氧-乙炔火焰喷涂的方法在其磨损表面喷熔钴基WC涂层。
- DESIGN OF HIGH VELOCITY ARC SPRAYING GUN 高速电弧喷涂枪的设计
- high velocity oxygen fuel spraying 超音速火焰喷涂
- high velocity arc spraying (HVAS) 高速电弧喷涂
- high velocity arc spraying process 高速电弧喷涂