您要查找的是不是：
- The occurrence of high shear stress at the fibre end is a factor which is expected to lead to crack generation. 在纤维端部存在高切变应力视为导致产生裂缝的因素。
- However, high shear heat and oscillatory shear stress would be generated by strong vibration and the microstructure of foams might be destroyed thereby. 而施加较强的振动作用可能会产生较大的剪切热和脉动剪切应力，从而破坏泡沫的微孔结构。
- Effects of low and high shear stress on tight junctions of endothelial cells 高、低剪切力对内皮细胞紧密连接的影响
- high shear stress 高剪切压力
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- Effect of high shearing stress during melt extruding on the mechanical properties of PP-HDPE-Talc fillers blends 挤出共混中的高剪切应力对PP-HDPE-滑石粉共混材料力学性能的影响
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- Keywords PP;Talc;twin screw extruder;higher shearing stress; 聚丙烯;滑石粉;双螺杆挤出机;高剪切应力;
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
- Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05. 在高剪切下航空航天合金润滑剂的爆炸性反应的特性的试验方法(05。
- A fluid is a substance that deforms continuously under an applied shear stress. 液体在剪应力作用下不断变形？？
- Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer (08. 用挤压粘度计测定高剪切率下塑料溶胶和有机溶胶的表观粘度的试验方法(08。
- The main shear stress and its hydraulic system, calculation and research. 主要对其剪切力和液压系统进行计算和研究。
- There exists a distortional flow in slurry at higher shear rate. 药浆存在流动畸变。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在动物研究中还发现切应力与内皮细胞增生程度有关。
- High shear peak strains (2%-26%) occurred near the endplate and at the inner AF. 高剪力峰应变(2%25-26%25)发生在靠近终板和内层纤维环处。
- With gob span increasing, equivalent shear stress in basic roof increases. 随着采空区跨度的不断增加，基本顶等效剪力不断增大。
- Indeed, W/O emulsions require high shear homogenisation and then specific device to get stable formulations. 的确，W/O型乳剂要求高以及获取稳定配方的特殊仪器。
