您要查找的是不是：
- hot coated process [机] 热敷法
- As an adhesion promoter, the chlorinated polypropylene(CPP) is used in the coated process for polypropylene products. 氯化聚丙烯(CPP)是用于聚丙烯制品涂饰过程的附着力促进剂。
- The coated process technology of spun laced nonwovens by polyvinylalcohol for high grade synthetic leather substrates is stated. 本文介绍了水刺布用作高档合成革基布时,采用聚乙烯醇上浆整理的工艺。
- Compile and develop SSEAC/ STS assembly/ coating process. 制订和完善SSEAC/TS总装/塑生产工艺流程。
- With carbon steel pretreated with flux, hot dip coating process and bimetal producing of ZAS35 alloy/carbon steel as well as bimetal interface characteristic were studied. 研究了经熔剂法预处理的碳钢热浸镀ZAS35锌合金工艺、ZAS35锌合金 /碳钢双金属制作工艺及双金属界面特性。
- CTE-501 is designed as a paper coating additive to improve the runnability of the coating process, and impart improved quality to the coated paper. CTE-501是纸张涂料的添加剂，用于改进涂敷过程的流动性，并且使涂敷纸张具有更好的质量。
- The coating process affecting the radiating capacity of chaff is analyzed. 涂敷稠度相同的烟火药,涂层厚的箔片辐射强度偏高。
- Lu:su caps, vacuum coating processing. 铝塑瓶盖、真空镀膜加工。
- The antiglare films produced by wet roller coat process need to adopt the appropriate coating system. 用湿法辊涂工艺制备防眩光涂膜，需采用合适的成膜体系。
- Caution must be noted: the hot coatings should not be applied to the cold surfaces and, conversely, the cold coatings should not be applied to the hot surfaces. 应特别注意:不能在冷的底材上涂装热涂料,同样不能在热的底材上涂装冷涂料。
- A metallurgical coating process in which iron or steel is immersed in a powder of another metal, such as zinc, chromium, or aluminum, and heated to a temperature below the melting point of either. 渗碳处理一种冶金镀膜工序，在此工序中把钢或铁浸入另一种金属如锌、铬或铝的粉剂里，并加热至这一金属的熔点温度以下
- However hot it is, he will not take off his coat. 无论多热,他也不会脱掉外衣。
- A bowl of hot chicken soup is good for you. 喝一碗热鸡汤对你有好处。
- The hot weather has soured the milk. 炎热的天气使牛奶变酸了。
- Direct coat a version of the roll coating process where the applicator roll revolves in the same direction as the travel of the strip. 沉积量(涂布量)化学转化膜或其它物质在金属前处理过程中的沉积量。
- TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
- The reason of Linxia model which is dependent on business and coat processing cannot make Linxia achieve taking off is the lowlevel equilibrimn trap of regional trade. 摘要:依赖于商贸经济和以皮毛加工为主导产业的临夏模式，未能使临夏实现经济起飞的原因是区际贸易的低水平均衡陷阱把其经济发展限制在了一个狭小的范围。
- The hot weather made me feel lethargic. 炎热的天气使我昏昏欲睡。
- The opening coloring coating process,problems existed and countermeasures of waterborne wood paint are introduced. 介绍了水性木器漆开放着色涂装工艺、存在的问题及解决的措施。
- Abstract: The reason of Linxia model which is dependent on business and coat processing cannot make Linxia achieve taking off is the lowlevel equilibrimn trap of regional trade. 文章摘要: 依赖于商贸经济和以皮毛加工为主导产业的临夏模式，未能使临夏实现经济起飞的原因是区际贸易的低水平均衡陷阱把其经济发展限制在了一个狭小的范围。
