您要查找的是不是：
- Study of Die Holder Design for Large Hot Die Forging Press 大型热模锻压力机模架设计浅探
- Conditions and Advantages of Precise Forging on Hot Die Forging Press 在热模锻压机上进行精密闭式模锻的条件和优点
- hot die forging press 热模锻压机
- Increasing service life of die for hot die forging 提高热模锻生产中的模具使用寿命
- KEY TECHNOLOGIES OF MODERN HEAVY DIE FORGING PRESS 现代重型模锻液压机的关键技术
- aviation hydraulic die forging press 航空模锻液压机
- Electro-hydraulic servo-control system for large hydraulic press for hot die forging 大型热模锻水压机的电液伺服控制系统
- Effect of Heating Process on the Die Life for Hot Die Forging 热加工工艺对铝合金热模锻锻模寿命的影响
- Hot die forging hydraulic press 热模锻液压机
- Analysis of the Hot Die Forging Process for the Tie Rod by Finite Element Method and Prediction of the Forging Die Life 连杆热模锻过程有限元分析及锻模寿命预测
- Keywords Weighty equipment Heavy die forging press Very high pressure Prestressed structure Wire wound; 重大装备;重型模锻液压机;超高压;预应力结构;钢丝缠绕;
- Finite element analysis of corresponding relationship between combined stress of hot die forging and its material elastic module 热锻模综合应力与弹性模量关系的有限元分析
- The Situation of Hydraulic Open Die Forging Press and Heavy Forgings in China 中国自由锻液压机和大型锻件的生产前景
- hot die forging 热模锻
- die forging press 锻压机
- Weighing 2,210 tons,the automatic forging press is operated by one worker only. 虽然这台自动锻压机重2，210吨，但只由一个工人操作。
- Heavy die forging press 重型模锻液压机
- The main application range of die forging process on screw press are summarized. 本文总结了螺旋压力机模锻工艺技术的主要适用范围。
- HSS-like metal was directly obtained on hot die steel H13 by laser overlaying. 研究韧性较高的热作模具H13钢表面上通过激光合金堆焊的方法直接复合类高速钢金属。
- Abstract: The characteristic of driving system for the dispenser used in ten-thousand-ton multidirectional die forging hydraulic press was analyzed. 摘 要： 分析1万t多向模锻水压机分配器驱动系统的结构特点，提出一种智能超差二次调整控制算法。
