您要查找的是不是:
- hot pressed ceramics 热压陶瓷
- Compressing moulding presses.., hot press... 就是液压机什么得。。。
- The results show that it is feasible to use ceramics as friction element material instead of hard alloy, or to fix the ceramics on the bit by hot press sintering process. 试验结果表明,用陶瓷代替硬质合金作为热机碎岩钻头的摩擦材料是可行的,利用热压烧结工艺可以将陶瓷固定在钻头上。
- The results show that it is feasible to use ceramics as friction element material instead of hard alloy , or to fix the ceramics on the bit by hot press sintering process. 试验结果表明,用陶瓷代替硬质合金作为热机碎岩钻头的摩擦材料是可行的,利用热压烧结工艺可以将陶瓷固定在钻头上。
- TiB2-Al2O3 Multiphase ceramics with Y2O3-La2O3 as sintering aids are fabricated by hot pressing. 本文以Y2O3-La2O3为烧结助剂,通过热压烧结制备了TiB2-Al2O3复相陶瓷,研究了原料组成对材料的显微结构和力学性能的影响。
- The composite dielectrics mainly composed of PTFE,ceramics and glassfibers are prepared by hot pressing. 采用热压工艺制得聚四氟乙烯/陶瓷/玻璃纤维复合介质材料。
- At the polyalkene Oct.1999, after the injection molding, hot press as molding. 一般以聚烯烃为主要原材料,经过注塑、热压等工艺加工成型。
- Best result was achieved when powder mixture of 2.0Ti/1.1A1/1.0C was hot pressed at 1450 for 60 minutes. 在1450℃下热压烧结组成为2.;0Ti/1
- Which was hot pressed between a polyamide film and a Cu-foil to show peeling strength 1.25 kg.cm, vs. 0.30 kg.cm, for a similar compn. not contg. SBR. 将该薄膜夹在一层聚酰胺薄膜和一层铜箔之间并热压;与不含丁苯橡胶的类似物相比;该粘接剂粘接的聚酰胺薄膜和铜箔之间的撕裂强度从0.;3kg/cm提高到了1
- The relative density of ALT ceramic composite is much higher than that of pure hot pressed LaTaO3, which indicates that the addition of Al2O3 acts sintering aids. ALT陶瓷复合材料的相对密度比烧结纯LiTaO_3陶瓷的高得多,表明Al_2O_3起到烧结助剂的作用。
- A new type BN ceramic material is made by hot pressing(HP) method. 采用热压(HP)法制备了BN陶瓷材料。
- The line is composed of loader, hot press, unloader and returning roller conveyor group. 本生产线由装板机、热压机、卸板机及垫板回送机构组成。
- Hot Press:full automatic Japan "YAMAMOTO" Hot press,Tempreture,Press and Time controlled by computer. 热压机:日本YAMAMOTO热压机,温度、压力、时间全自动控制。
- The soy protein and complex plasticizers were mixed and hot press molded for making soy protein plastics. 结果表明,采用复合增塑剂制得的大豆蛋白塑料其拉伸强度,杨氏模量均增加。
- BN-base ceramic nozzle produced by hot press sinteting is chosen through the selective tests on material and process. 根据喷嘴的材料与工艺的选择试验结果。选用了热压烧结氮化硼(BN)基陶瓷喷嘴。
- A microcomputerized control system for hot press in making hardboard is de-signed. 本文提出了一种硬质纤维板热压机微机控制系统的设计方案。
- The study of a special investment used for the heat pressed ceramics 热铸型陶瓷包埋料的研制和铸造精度的检测
- The powder can be directly consolidated into blocks via hot pressing. 这些粉末可以通过热压形成整块。
- A bowl of hot chicken soup is good for you. 喝一碗热鸡汤对你有好处。
- The hot weather has soured the milk. 炎热的天气使牛奶变酸了。