您要查找的是不是：
- A hot dip Zn 5%Al RE coating on high carbon steel wire is tested. 试验了在高碳钢丝表面上热浸镀Zn 5%25Al RE合金层。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The effect of Ni content in Zn bath on thickness of hot dip galvanized coating was studied using SEM. 应用SEM、EPMA等方法研究了锌浴中镍含量对热浸锌镀层厚度的影响，试验结果表明：当锌浴中镍含量小于0.;12%25 (wt)时，镀层随镍含量增加而减薄；
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- The surface morphology and composition of Zn 5%Al RE coating hot dip plated on alloy steel wire was analyzed by means of metallography,SEM and EPMA. 本文采用金相显微镜、扫描电镜和能谱仪等设备分析了在Zn?5%25 Al?RE合金溶液中热浸镀中碳钢丝表面的组织形貌和成分。
- The hot dip Zn Ni alloy coating provides good anticorrosion performance. Two kinds of materials, Q235 and Q345 used for galvanizing Zn and Zn Ni alloy. 对Q2 35和Q345两种材料表面热浸镀纯Zn和Zn Ni合金 ,研究Ni对热镀锌耐蚀性的影响。
- The white corrosion products on hot dip Zn Al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM. 采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
- The research status about of the microstructure,formation mechanism and growth kinetics of hot dip aluminizing coating is reviewed. 综述了热浸镀铝钢镀铝层的组织、形成机理、生长动力学和扩散后组织的研究现状,指出了热浸镀铝钢今后的研究方向。
- The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line. 对于任何连续热镀锌线退火炉都是关键设备。
- Solvent can be added to plastisol coating to lower the viscosity, producing organosol coatings. 可加入溶剂到塑性溶胶涂料中以降低它的粘度，形成有机溶胶涂料。
- The research in flux is mainly to change the original double hot dip coating technique, and change the first hot-dip galvanizing into electrolyzing flux. 对于助镀剂的研究主要是改变原有的双热浸镀工艺，改第一次热浸镀锌为电解助镀。
- With carbon steel pretreated with flux, hot dip coating process and bimetal producing of ZAS35 alloy/carbon steel as well as bimetal interface characteristic were studied. 研究了经熔剂法预处理的碳钢热浸镀ZAS35锌合金工艺、ZAS35锌合金 /碳钢双金属制作工艺及双金属界面特性。
- Plastisol coatings are dispersions of finely divided higher molecular weight polyvinyl chloride resins in plasticizers. 塑性溶胶涂料高分子量聚氯乙烯树脂非常精细地分散在增塑剂中而形成的涂料。
- High structure strengh,hot dip galvanized,greatly protract time of use. 高强度管材、产品经热镀锌处理、大大地延长了使用寿命；
- Surface quality of hot dip plating Zn-Al alloy were further improved. 采用该合金助镀剂进行Zn Al合金热浸镀的样品 ,表面质量得到进一步改善。
- The aluminized steel wire was made by hot dip process.The scanning electron microscopy (SEM), EDAX and MEF3 microscopy were used to analyze the microstructure of the coating. 用熔剂法钢丝热浸镀铝工艺制备镀铝钢丝,通过扫描电镜、能谱和MEF3显微镜对镀层形成机理和镀层的组织结构进行了分析。
- Unique, dual-handle styling allows for better leverage to bear down harder. Tool is forged for superior strength and plastisol coated handles provide a firm grip. 可取出坚固的滤油器,具有特殊的双扳手风格。表面加固处理,塑料柄更容易紧握。
- For acquiring new alloy coating with good corrosion resistance and production cost equivalence with hot dip zinc coating,the hot-dip Zn-Mg alloy coating of containing 0. 质量分数,下同)的热镀锌镁合金镀层,对各种成分的锌镁合金镀层进行了电化学测试和中性盐雾实验,并通过电子扫描显微镜观察了镀层的表面形貌。
- Commodity:Hot dipped galvanized steel in coil . 货物名称:冷轧热镀锌卷。
- PVC PLASTISOL COATING FOR AUTO MOBILE 汽车用CR-PVC塑溶胶涂料
