您要查找的是不是:
- The results show that the density is the most notable factor,and hot pressing temperature and dose of bagasse are secondary. 试验结果表明:速生杨木/甘蔗渣重组材的密度是最显著性的影响因素,其次为热压温度和甘蔗渣加量。
- The factors are hot pressing temperature, glue spread, BL-formaldehyde absorptive reagent spread and hot pressing time in influence sequence. 影响大小次序是热压温度>脲胶施加量>BL-甲醛消纳剂施加量>热压时间。
- Temperature distribution was tested along thickness direction of Dendrocalamus giganteus timber under different hot pressing temperatures. 测定了龙竹竹材在不同热压温度下干燥时的温度分布。
- hot press temperature 热压温度
- Compressing moulding presses.., hot press... 就是液压机什么得。。。
- 4.Formaldehyde emission becomes lower with increase of BL- formaldehyde absorptive reagent spread, augment of hot pressing temperature, prolongation of hot pressing time. 4.;单因素试验时,随着BL-甲醛消纳剂施加量的增加、热压温度的升高、热压时间的延长,甲醛释放量越低;
- This product is collod feathering achro, aticity and viscosity, wghhich can clear the thick oxideatice horizon hot pressed end plate or rollsteel plank which be processed or welded under hot temperature and hot pressure. 本产品为无色透明的粘稠状胶体,针对不锈钢热压封头或用热轧板制作工件等,经过高温高压处理或焊接时所产生红、黑、黄等各种类型的较厚氧化层,清除迅速,彻底。
- TiB2-Si3N4-BN composite was fabricated by hot press , and the influence of the content of additive and sintering temperature on the property is also discussed. 采用真空热压烧结方法制备了TiB2-BN复合材料,探讨了Si3N4掺加剂含量和烧结温度对材料结构和性能的影响。
- hot pressing temperature 热压温度
- At the polyalkene Oct.1999, after the injection molding, hot press as molding. 一般以聚烯烃为主要原材料,经过注塑、热压等工艺加工成型。
- Best result was achieved when powder mixture of 2.0Ti/1.1A1/1.0C was hot pressed at 1450 for 60 minutes. 在1450℃下热压烧结组成为2.;0Ti/1
- By using the system, pressing time could be automatically changed with the temperature of hot press platen. 这个系统能随着热压板温度的变化自动调整保压时间。
- Which was hot pressed between a polyamide film and a Cu-foil to show peeling strength 1.25 kg.cm, vs. 0.30 kg.cm, for a similar compn. not contg. SBR. 将该薄膜夹在一层聚酰胺薄膜和一层铜箔之间并热压;与不含丁苯橡胶的类似物相比;该粘接剂粘接的聚酰胺薄膜和铜箔之间的撕裂强度从0.;3kg/cm提高到了1
- A new type BN ceramic material is made by hot pressing(HP) method. 采用热压(HP)法制备了BN陶瓷材料。
- Analyzing the effect of veneered technology factors (adhesive content and unit press and temperature and time of hot press)on the warp degree of the furniture board by orthodoxy-corrected test. 主要讨论了贴面工艺对杨木多层胶合板双面贴硬枫薄木的家具板材翘曲度的影响,采用正交实验法分析了涂胶量、热压压力、热压温度、热压时间四个因素对杨木多层胶合板双面贴硬枫薄木的家具板材翘曲度的影响。
- The relative density of ALT ceramic composite is much higher than that of pure hot pressed LaTaO3, which indicates that the addition of Al2O3 acts sintering aids. ALT陶瓷复合材料的相对密度比烧结纯LiTaO_3陶瓷的高得多,表明Al_2O_3起到烧结助剂的作用。
- The line is composed of loader, hot press, unloader and returning roller conveyor group. 本生产线由装板机、热压机、卸板机及垫板回送机构组成。
- Hot Press:full automatic Japan "YAMAMOTO" Hot press,Tempreture,Press and Time controlled by computer. 热压机:日本YAMAMOTO热压机,温度、压力、时间全自动控制。
- A bowl of hot chicken soup is good for you. 喝一碗热鸡汤对你有好处。
- The hot weather has soured the milk. 炎热的天气使牛奶变酸了。