您要查找的是不是:
- It is pointed out that optimization of human - machine System is the key to achieve actual effect in the implementation of CIMS. 指出人机系统的优化是实施CIMS能取得的实际成效的关键。
- It is a human viz. machine system characterized with big territory, multiple targets, dynamicity, and complexity. 它是大跨度、多目标、动态性、复杂性的人-机系统。
- The design of human machine interface, kernal arithmetic, and functional module were realized based on SINUMERIK 840D system. 针对西门子840D数控系统,进行了自动编程系统开发,实现了人机界面设计、系统算法设计和功能模块设计。
- The former uses SCADA/HMI(Supervisory Control And Data Acquisition/ Human Machine Interface) to implement system function, and the network is connected by industry Ethernet. 前者采用SCADA/HMI(Supervisory Control And Data Acquisition/Human Machine Interface,监控及数据采集/人机界面)实现系统功能,网络连接采用工业以太网,以实现数据的透明化。
- It is composed of many agricultural subsystems correlating each other to form a multiple arrangements complex macrocosm, i.e. a Human machine environment system (HMES). 为此,试图运用人-机-环境系统工程的原理,应用复杂大系统的方法,从宏观、中观、微观等不同的层次和角度,对农业机械化工程的规划与优化进行新的理论研究。
- This system is composed of detector module,data acquisition module,ARM MPU module,network interface communication module and human machine interface module. 该系统硬件由探测器模块、数据采集模块、ARM微处理模块、网络接口模块和人机接口模块等几大模块组成。
- Force Sensing and Force Control Technology for Intelligent Machine System II. 智能机器系统力觉及力控制技术2。
- human machine system 人 机系统
- And then a suit of tension control system was developed,which takes S7-300 PLC of SIEMENS company as controller,takes TP27 touch panel as human machine interface(HMI),and takes multi-point interface as communication protocol. 并设计了一套以SIEMENS公司的S7-300可编程序控制器为控制器,以TP27触摸屏为人机界面,以多点接口为通信方式的张力控制系统。
- The system adopted a distributed framework with the pagering center as human machine interface, the pager receiver and MCU-controll system as remote terminal unit so as to get greater flexibility in use. 该系统采用寻呼台为上位机、寻呼接收器和单片机控制系统为下位机的分布式结构,给条屏使用以很大灵活性。
- This paper introduces the instruction of DCS system, analyzes the reason of the human machine interface breakdown, and presents the ways that resolved the question and some suggestions. 文章在介绍DCS系统体系结构的基础上,分析了DCS人机界面死机的基本原因,并提出了解决DCS人机界面死机的方法和建议。
- A digital IGBT inverter welding machine system based on DSP and MCU was designed. 设计了基于DSP和单片机的全数字化IGBT逆变焊机系统。
- The calculating machine of industry was the core of the diathermanous roller machine system. 传热轧管机控制系统以工控机为核心。
- Virtual DCS can be divided into virtual DPU(Distributed Process Unit)and virtual HMI(Human Machine Interface). 虚拟DCS可划分为虚拟分散处理单元DPU(DistributedProcessUnit)和虚拟人机接口HMI(HumanMachineInterface)两部分。
- Analytic result is illustrated to show that the method is suitable to probability fuzzy design of other machine system. 分析结果表明该模型建立方法亦适合其他机械系统的概率模糊设计。
- A miniaturized ultra precision CNC milling machining system is presented. 摘要介绍了自行研制的小型超精密数控微铣削系统构成。
- These substances, too, need to be considered if scientists are to truly understand how the human machine operates and how to correct its maladies. 科学家想要真的了解人体这个机器如何运作,以及晓得怎样治疗身体病痛的话,就不能不考虑这些物质。
- Using programmable logic controller (PLC) and TD200 Text Display control system work in Corbin block molding machine system ,it make system work well. 在碳块成型机系统中,使用可编程控制器(PLC)(西门子S7-200)作为系统自动运行控制器,TD200文本显示器为操作显示部件,二者结合使系统很好地工作。
- Thirdly, Human Machine Interface (HMI) is given which are developed with King View (a kind of industry control configuration software). 采用组态王开发设计监控系统人机界面;
- LiBr/H_2O absorption machine system and vapor-compression cycle with ice-storage system may be obtained wide applications in near future in Libya. 第二部分为带有冰蓄冷的压缩式制冷机系统的若干传热特性,本系统在利比亚电有应用前景;