您要查找的是不是：
- hydraulic cylinder piston rods 液压缸活塞杆
- Electrohydraulic push rod drives the two-way pump to output pressure oil with rotation of motor clockwise and counter-clockwise, by control of hydraulic valve, send to the hydraulic cylinder, to achieve the reciprocating movement of the piston rod. 电液推杆以电动机正反转，带动双向泵输出压力油，经液压阀控制，送至液压缸，实现活塞杆的往复运动。
- When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged. 当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
- hydraulic cylinder piston stop rod 液压缸活塞止动杆
- roll shifting cylinder piston rod 窜辊缸活塞杆
- hydraulic hydraulic cylinder piston 液压缸活塞
- Reason and Measure of Oil Stain on Lift Cylinder Piston Rod 举升油缸活塞杆带油的原因及解决措施
- Flow Resistance of Hydraulic Cylinder Piston Ring Seal Structure 水压缸活塞环密封流动阻力研究
- Kinetic Resistance of Hydraulic Cylinder Piston Ring Seal Structure 水压缸活塞环密封运动阻力研究
- A hydraulic lock is installed on the vertical leg cylinder to avoid extending of the leg piston rod in operation. 在支腿垂直油缸上装有液压锁,能可靠地防止行驶时支腿活塞杆伸出。
- brake cylinder piston rod 制动缸活塞杆
- Worn crankcase piston rod seals O-rings on. 曲轴箱柱塞连杆O型圈磨损或柱塞衬套磨损。
- hydraulic cylinder piston 液压缸活塞
- Worn crankcase piston rod seals. 曲轴箱连杆密封件损坏。
- A spring holds the other ends in contact with the piston of a hydraulic cylinder. 另一端由一个弹簧托住，与液压缸的活塞相接。
- Replace crankcase piston rod seals. Replace O-rings. 更换新的曲轴箱柱塞连杆O型圈。
- The AFO cylinder features include a stainless steel tube and roller burnished piston rod. 气缸的踝足矫形器功能还包括一个不锈钢管，辊磨光活塞杆。
- The CZE series double acting single rod piston heavy machinery hydraulic cylinders are the actuator which reciprocates linearly in hydraulic system. CZE系列双作用单杆活塞式重机液压缸，是液压系统中作往复直线运动的执行机构。
- When assembling, leave the mark on body of piston rod frontward. 装配时，杆身上的记号要朝前。
- Model CSJ super fishing jar adopts mechanical and hydraulic combined design and carries out upward jarring by the reciprocting motion of the conical piston in the hydraulic cylinder. CSJ型超级震击器采用机械和液压组合设计，通过锥体活塞在液压腔内的往复运动实现向上震击的功能。
