您要查找的是不是：
- hyperbaric TIG welding 高压TIG焊接
- Welding tests showed the panel TIG welding machine can be applied successfully in hyperbaric conditions. 试验证明,该焊机可以成功地应用于高压环境下的焊接。
- This paper introduces the TIG welding technology for EGR cooler shell. 介绍了EGR冷却器外壳钨极氩弧焊焊接工艺。
- The TIG welder used for much of the construction. 在氩弧焊焊接机建造多次使用。
- The multipurpose welders in the series can be operated for MMA, DC TIG welding, Plasma cutting processes. 焊机具有手工弧焊,直流氩弧焊,等离子切割多种功能。
- TIG welding power source made from SCR and bifilar winding energy saving inductor is introduced in this paper. 研制了一种用双绕组储能电抗器构成的晶闸管TIG焊电源。
- The fuzzy pattern recognition technique is then applied to classifying TIG weld quality. 模糊模式识别工艺被应用于TIG焊接法质量的等级分类。
- Bead welding process to Q235A was made by TIG welding and H1Cr24Ni13 austenitic stainless steel welding wire. 采用TIG焊方法和H1Cr24Ni13奥氏体不锈钢焊丝,对Q235A进行堆焊加工。
- The trawsform on the weld penetration depth are studied after welding the Austenitic steel of activated flux with TIG welding. 在采用TIG焊接方法时,在奥氏体不锈钢的表面涂敷一层活性化焊剂进行焊接,会影响焊缝熔深的变化。
- Mathematical model and analysis of the protective effect of TIG welding is adopte for torch design. 焊接时保护气流流场的数值分析对于焊枪的设计提供了新的思路。
- The general concept and consist of pulse TIG welding machine improved are introduced in this paper. 介绍一种用普通直流氩弧焊机改装脉冲焊的装置,论述了各组成部分的基本原理。
- China is a country with rich tungsten resource, tungsten electrodes have been widely applied in the TIG welding. 我国是钨资源大国,钨电极在亚弧焊接中已得到广泛应用。
- A type of switched HF pulse TIG welding power source is introduced in this paper. 本文介绍一种开关式高频脉冲TIG焊电源。
- The results of experiment on the pulse TIG welding process show that the fuzzy inference-neural network control sc... 将上述方法用于实际脉冲TIG焊过程控制，结果表明模糊神经网络控制方案有效。
- The automatic TIG welding has been successfully used in the successive welding of stainl... 以实际生产表明了钨极自动氩弧焊连续焊接不锈钢复合管的成功应用。
- Fig.6 The effect of heat input on the UTS of the TIG welded joints. 图6线能量与钨极氩弧焊焊接接头极限抗拉强度的关系。
- The high-frequence oscillator used in TIG welding is a serious interference source to the nearby electronic circuits. TIG焊中采用的高频振荡器，是邻近电子电路的严重干扰源。
- The crack analysis and the prevention measure for TIG welding of AZ31B magnesium alloys were studied. 摘要分析了AZ31B镁合金TIG焊接头裂纹形成机理，并提出了相应的预防措施。
- A 150A DC TIG welding machine is developed,using specially designed thyristor rectifier and IC control circuit,which is simple,reliable and of high quality. 研制了一种150A直流TIG焊机，采用特殊的晶闸管主电路和集成电路控制技术，具有简单、可靠和高性能的特点。
- According to the arc light features of pulsed TIG welding and its effects on vision measurements, a special method of image capturing and controlling is put forward. 根据脉冲TIG焊接电弧的弧光特性及其对视觉检测的影响，提出了一种独特的图象采集和控制方法。
