您要查找的是不是：
- idle adjustment screw switch 化油器怠速孔调节螺钉开关
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 拧紧调整螺丝到3 N·m (30 in-lbs)扭力。
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝，拔出或插入连接杆进行调整。
- Firmly screw can on adapter, and turn the flow adjustment screw. 将料罐倒置与喷枪连接，旋转打开流量阀，调节流量。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆，调整器螺丝和弹簧。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- Presser foot adjustment screw graved with graduation makes digital pressure control easy and precise. 压脚调节螺栓上刻有刻度，数字化调节更易控制压脚压力，因此，压脚压力可轻松而准确的重设。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- Keeping well away from the propeller, adjust the engine to maximum rpm with the mixture adjustment screw marked with an "H". 跟螺旋桨保持距离;推油门全开.;转进标记"H"螺丝求取最高转速。
- Adjustment of parallelity, adjust screw (6), you can set the parallelity between printing squeegee and ink-collecting squeegee. 平行度调整:调节螺丝(6),可调整刮墨刀、回油刀与丝网的平行度。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- Lubricate adjuster screw threads and pivot with spray lube. 使用喷雾润滑油润滑调整器螺丝螺纹和枢轴。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- Tie-Rod of Marble Gang Saw with hydraulic driven is for connecting hydraulic tensioner and saw blade. It composes of Rear Tie-Rod, adjust screw and wedge. 大理石框架锯液压锯夹用于连接液压涨紧器和锯条，它由前后锯夹，蝴蝶板、插板和调整螺杆组成。
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- I groped for the light switch in the dark room. 我在黑暗的房间里摸索着找电灯开关。
- idler adjusting screw 怠速喷嘴调整螺钉
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- It's foolish to idle away one's precious time. 把大好时光浪费掉是愚蠢的。
