您要查找的是不是：
- Impact Wear and Wear Mechanism Study of High Vanadium High Speed Steel 高钒高速钢冲击磨损性能与机理的研究
- impact wear mechanism 冲击磨损机理
- The wear mechanism of the converter dedust fan is briefly analyzed. 简要分析了除尘风机的磨损机理。
- The adhesive wear was the dominative wear mechanism. 磨损机制以粘着磨损为主。
- Tribological properties and wear mechanism of the CCF/MCPA are investigated. 主要研究了CCF/MCPA复合材料的摩擦学性能和磨损机制。
- The corrosive impact wear behavior and mechanism of high manganese steel and low carbon high alloy steel as new liner material were investigated under impact energy of 2.0J in acid-ironstone slurry. 研究了在酸性铁矿石浆料及2.;0J冲击功条件下;高锰钢及新型低碳高合金钢衬板的冲击腐蚀磨损性能和机制。
- The main wear mechanism of rare earth/MoSi 2 composite is adhesive wear. 稀土 /MoSi2 材料的磨损机制主要是粘着磨损
- The impact wear behavior of AZ91D magnesium alloy s in de-ionized water has been investigated. 研究了AZ91D镁合金在冲击载荷和去离子水介质综合作用下的磨损特性。
- The main causes are the impact wear between the solids.The passageway design of the mine stand pump can meet the exchange law of the solid flow field. 矿用立泵的流道设计符合固体流场的变化规律,叶轮发生的主要是摩擦磨损,极大地延长了潜水泵的使用寿命。
- The main wear mechanisms are adhesion, diffusion and fatigue. 磨损机理主要是粘结磨损、扩散磨损以及疲劳磨损。
- The influences of cryogenic treatments on the microstructure,material performances and the impact wear resistance of the superhigh manganese steel are studied. 主要研究了深冷处理对超高锰钢组织、性能及耐磨性的影响。
- The main wear mechanism of high speed roller chain is formation and propagation of crack in top layer of pin and bush. 汽车用高速滚子链的主要磨损机制是销轴、套筒零件表层的裂纹生成、扩展与剥落。
- The research progress of water lubricated bearings was introduced,including material,lubricate and wear mechanism. 介绍了水润滑轴承材料、润滑机理及磨损机理的研究现状。
- Wear mechanism of direct-bonded and silicate bonded MgO-Cr2O3 bricks for copper-making converter has beenstudied. 研究了炼铜转炉用直接结合镁铬、硅酸盐结合镁铬砖的损毁机理。
- The research progress of water lubricated bearings was introduced, including material , wear mechanism and application. 介绍了水润滑轴承材料、润滑机理及磨损机理的研究现状。
- The wear mechanism of Mg-PSZ ceramic is micro-ploughing accompanied by microcracking at room temperature. 随着温度的进一步升高磨损率增大；
- The results show that the specimen which contains 10% FeV50-A (mass fraction) in the casting penetration agent has the best impact wear resistance which is 71 times as much as ZG310-570 specimen. 实验结果表明:铸渗剂中FeV50-A为10%25(质量分数)时获得的铸渗试样抗冲击磨损性能最好,是ZG310-570试样的71倍。
- Under the condition of boundary lubrication,adhere wear mechanism and abrasive grain wear mechanism do the business at the same time. 在边界润滑条件下;镀层的磨损机制为粘着磨损与磨粒磨损并存.
- According to nephogram of stress, the wear mechanism of the conical twin-screw for the processing of wood/plastics composite is also analyzed. 根据螺杆的应力状态，对用于加工木塑复合材料的锥形双螺杆磨损机理进行了分析。
- The wear mechanism of stainless steel against copper based sintered alloy is mainly attributed to adhesion,abrasion and oxidation. 不锈钢/铜基烧结合金材料的磨损机制主要是粘着磨损及氧化磨损。
