您要查找的是不是：
- The results showed CPE had synergistic compatibilization effect with DCP and TAIC on WABS/WPP, resulted in great increase of impact strength and no decrease of tensile strength. 结果表明，CPE与交联剂DCP和TAIC协同作用，可以对WABS/WPP起到良好的增容作用，共混合金在不降低拉伸强度的同时，冲击强度可获得较大的提高。
- After being immersed for two years, the adhesive strength of Gent liner A or Molloplast B to PMMA were decreased by 35% or 47% respectively, with a little decrease of tensile strength and increase of hardness. 在浸入人工唾液2年后，粘接强度分别下降35%25和47%25，拉伸强度也都有所下降，硬度略有增加。
- Michel:Ever hear of tensile strength?Hooke's Law of Elasticity? 听说过抗张强度吗?胡克弹性定律.
- increase of tensile strength 抗拉强度增大
- Michel: Ever hear of tensile strength? Hooke's Law of Elasticity? 听说过抗张强度吗?胡克弹性定律.
- Ever hear of tensile strength? Hooke#s Law of Elasticity? 听说过延展强度吗?胡克定律?
- Ever hear of tensile strength? Hooke's law of elasticity? 听说过抗张强度麼?胡克弹性定律?
- Michael：Ever hear of tensile strength? Hooke's Law of Elasticity? 听说过延展强度吗？胡克定律？
- The tensile strength, heat resistance and processability of the system decrease slightly with the increase of superfine wollastonite amount. 随着超细硅灰石用量的增大，体系的拉伸强度、耐热性能和加工性能都稍有下降。
- With increase of BDS content, the gloss, fluidity and impact strength of the compolsite increase, while tensile strength decreases and flexural properties change a little. 随着BDS含量的增加,PP/BDS共混物的光泽度、流动性和冲击强度升高,拉伸性能下降,弯曲性能变化较小。
- The tensile strength and Shore A hardness increased with the increase of viscosity gravity constant. 随着填充油粘重常数的增加 ,SBS的拉伸强度和邵尔A型硬度增加。
- Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break. 橡胶或塑料涂层织物。拉伸强度和断裂伸长的测定。
- Specific strength. The ratio of tensile strength to specific gravity for a material. 比强度:一种材料的抗拉强度与比重的比值。
- It showed that an increase of the concentration of ATPU in the composites resulted in a noticeable increase in the impact strength of the obtained composites, but a drop in the tensile strength, flexural strength and Barcol hardness. 结果表明,随着ATPU用量的增加,复合材料的冲击强度迅速提高,但复合材料的拉伸强度、弯曲强度、巴氏硬度和热变形温度降低;
- Yajima S, Hayashi J,Omori M. Continuous silicon carbide fiber of tensile strength[J]. Chem.Lett., 1975(9):931. 冯春祥;刘心慰;杨一明.;连续碳化硅纤维的研制[J]
- Moreover, mechanical properties, including Shore A hardness, modulus at 100%, tensile strength, and tear strength of the MMT/NBR nanocomposites were improved with the increase of amounts of starch. 随着淀粉用量的增加，该复合材料的邵尔A硬度、100%25定伸应力、拉伸强度、扯断伸长率和撕裂强度均有所提高。
- Yajima S, Hayashi J,Omori M.Continuous silicon carbide fiber of tensile strength[J].Chem.Lett., 1975(9):931. 冯春祥;刘心慰;杨一明.;连续碳化硅纤维的研制[J]
- The results show that the values of tensile strength,Young's modulus,hardness and compacting toug... 通过粉体的表面改性,界面结合性能得到改善。
- The increase of production is evidence of that. 生产的增长就是这方面的例证。
- The result shows that the void content decreases while the crystallinity and the tensile strength increases with the increase of the holding time. 研究结果表明,随着保温时间的增加,复合材料的空隙率降低,结晶度和强力增加;
