您要查找的是不是：
- initial static deviator stress 初始静偏应力
- static deviator stress 静偏应力
- With the increase of initial deviator stress, the dynamic elastic modulus increases greatly under the same level of dynamic strain. 在相同的动应变水平下，随着初始偏移应力的增加，土体动弹性模量有较大幅度的增加；
- However, the change of the frequency has little effect on the degradation of dynamic elastic modulus.The effect of initial deviator stress is significant. 试验结果表明，随着应变的增大，不同频率荷载作用下土样的动弹性模量逐渐减小，但频率的变化对动弹性模量的衰减规律影响很小；
- It was shown that the cumulative plastic strain depended not only on the applied cyclic stress and number of cycles,but also on the initial static deviatoric stress level. 在上海地区典型饱和软粘土不排水循环三轴试验的基础上,分析了影响软粘土塑性累积变形的主要因素:循环荷载的作用次数,初始静偏应力和循环加载动偏应力。
- The effect of initial static load on the instantaneous response is related to the stiffness, mass and damp. 在对底层边柱突然失效的高层结构进行分析时，必须计算结构的瞬时动力响应。
- Initialize Static Class Members with Static Constructors. 使用静态构造器初始化静态类成员。
- In the unloading process, with the increase of deviator stress and the strain, the soil sample took on a dilatancy trend and showed a large negative pore pressure. 在卸荷过程中，随剪切应力的增大和剪切应变的发展，土样呈现剪胀趋势并在后期产生较大的负孔隙水压力。
- The effects of material nonlinearity, damping, initial geometric imperfection and initial static load on structure dynamic stability have been analyzed. 分析材料非线性、阻尼、初始几何缺陷、初始静荷载等因素对结构动力稳定性的影响。
- The first set of tests was that mean stress p was constant while deviator stress q changed; the second set of tests was that q was constant while p changed. 做了2种应力路径下的三轴排水剪切试验:平均应力等于常数、偏应力变化的剪切试验以及偏应力等于常数、平均应力变化的剪切试验。
- Experimental results showed that the resilient modulus of unsaturated cohesive subgrade soils reduced with the increase of deviator stress and the decrease of matric suction. 研究结果显示重复荷载下之偏应力愈大则回弹模量愈小，且回弹模量随基质吸力的增加而增加。
- The dynamic elastic modulus and damping ratio of normally consolidated soft clay subjected to undrained cyclic triaxial loading are investigated at different initial deviator stresses. 通过对萧山正常固结饱和软黏土进行应力控制的循环三轴试验,着重研究了初始偏应力对动弹模量(土动剪模量)及阻尼比的影响。
- When you have more complicated logic to initialize static member variables, create a static constructor. 当您无更单纯的逻辑来初初化动态败员变量时，请创建动态解构函数。
- You use this function to initialize static variables, enforce the singleton pattern, or perform any other necessary work before a class is usable. 在一个类被使用前，用该方法初始化静态变量，强制单件模式，或者执行任何其它必要的工做。
- Static initializers and static constructors provide the cleanest, clearest way to initialize static members of your class. 静态初始化器和静态构造函数提供了最洁净的、最直接的方式来初始化类的静态成员。
- Stress can be the undoing of so many fine players. 紧张可能是这许多优秀选手失败的原因。
- I do not get any static on my set. 我的电视机没有静电干扰。
- In the word "mother" the stress is on the first syllable. 在"mother"这一字里，重音在第一个音节上。,在＂mother＂这一字里，重音在第一个音节上。
- initial deviator stress 初始偏应力
- He reverted to smoking when under stress. 他因受到压力又恢复了吸烟的习惯。
