您要查找的是不是：
- inlay clad plate 双金属板
- The ARB technique not only increased greatly the bonding strength of TA1/Q235 clad plate,but also thinned the microstructure of Q235 plate. 结果表明采用累积叠轧焊方法不仅可以大幅度地提高TA1/Q235的结合强度,而且还可以获得连续均匀、组织细化的Q235的结合组织。
- Clad plate,which is made of titanium/steel, is tore in the edge of the plate during the process of explosives welding. 钛/钢复合板在爆炸焊接工艺中四周边角被撕裂现象严重,是爆炸焊接钛/钢复合板的难点之一。
- Welding material selction of clad plate refers to those of the same clad material respectively. 复层焊接材料挑选参考异类复层材料焊接时选用的焊接材料。
- When explosive welding the big and thick stainless steel clad plate, there are some quality defects of small area melding in interface appeared random. 摘要爆炸焊接中厚不锈钢复合板时，板面容易随机产生小面积的界面熔化缺陷。
- The practice proved that the welding quality of stainless steel clad plate was very steady if following the welding points. 实践证明,只要遵循其焊接要点,不锈钢复合钢板的焊接质量是非常稳定的。
- The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence. 对不锈钢复合钢板的焊接特点进行了理论分析,总结出其焊接三要素:焊接坡口、焊接材料和参数、焊接顺序。
- WELDING PROCEDURE OF STAINLESS STEEL CLAD PLATE 不锈钢复合钢板的焊接工艺
- Current Applications of Metal Clad Plate 浅析金属层压复合材料的应用现状
- Discussion On Welding of Stainless Clad Plate 不锈钢复合钢板焊接探讨
- thick-wall stainless steel clad plate 厚壁不锈钢复合板
- SlDuplex stainess steel clad plate 双相不锈钢复合板
- clad plate with corrosion resistant liners 带有腐蚀衬里层的复合钢板
- One of main reason for producing SCC in cladding plate weldments is the role of tensile residual stresses. 复板焊接结构出现应力腐蚀开裂的主要原因之一是拉伸残余应力的作用。
- The knight was completely clad in armor. 那位骑士全身披挂盔甲。
- The old lady was clad in a fur coat. 这位老妇人衣著皮裘。
- Manufacture of inlay clad strip 镶嵌复合材料的生产工艺
- The new technology enhanced whole bonding quality of explosive cladding plate more, reduced explosive charge in large scale, lowered disadvantageous effect on environment around. 此工艺进一步提高了爆炸复合板的整体结合质量,同时再次降低了焊接装药量,减小了对周围环境的不利影响。
- He only put a bit on his plate to make fashion. 他只是拨了一点食物到盘子里做做样子。
- To decorate or inlay with niello. 用黑色合金装饰或镶嵌
