您要查找的是不是:
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh. 米勒·普罗森还有基奥都对提高层间切变强度作了大胆的尝试。
- The graphic analyzer was used to analyze the particle size of emulsion.The interlaminar shear strength (ILSS)of carbon composites was measured. 用图象分析仪对乳液粒径进行分析,并测定了碳纤维复合材料的层间剪切强度。
- The method to determine the interlaminar shear strength for composite material is also proposed by five-point bending test, and the experimen... 同时,文中提出了用五点弯曲实验测试层间剪切强度的方法,给出了实验结果。
- The results show that the competitive adsorption of the components in the phenolics solution affects the interlaminar shear strength (ILSS) uniformity of a RTM product. 结果表明,在RTM工艺中,酚醛树脂和溶剂在纤维表面形成竞争性吸附,从而影响RTM成型复合材料界面组成和性能。
- The interlaminar shear strength (ILSS) under high temperature and moist resistance of glass fiber/methylsilicone (GF/ methylsilicone )composites were investigated. 研究了玻璃纤维/甲基硅树脂复合材料高温下层间剪切强度的变化及耐湿热性。
- The interlaminar shear strength of the composites was characterized by a short beam interlaminar shear test and a double edge-notched tensile shear test. 短梁剪切失效模式为假塑性,而拉剪失效模式为非假塑性破坏。
- The effect of argon plasma conditions on the fibers' interface property was studied by comparing the changes of the strength of fiber bundle and the interlaminar shear strength. 观察处理后纤维束纵向的微观结构,测试用最优化工艺参数处理的纤维束制成的纤维增强复合材料的单向性能,进一步论述等离子体处理对纤维束黏合性能的影响。
- The development and application status of the test method for interlaminar shear strength of laminates was introduced; practical importance of its study was pointed out. 本文介绍了层合板复合材料层间剪切强度测试与评价方法的发展和应用现状,指出了研究层合板复合材料层间剪切强度测试与评价方法的理论和实际意义。
- The change features in the interlaminar shear strength (ILSS),bending strength and modulus,thermal conductivity and coefficient of thermal expansion (CTE) of two dimensional carbon/carbon composites (2D C/C) at high temperatures are discussed. 研究了二维C/C(2D -C/C)复合材料在高温下层剪强度、弯曲强度和模量、热导率和线膨胀系数的变化规律。 结果表明 ,所制得的 2D -C/C复合材料的层剪强度随温度的升高变化不大、弯曲强度随测试温度的升高而增加 ;
- The results showed that the treatment of "NaClO acid + KH550 coupling" improved the composite properties remarkably with the interlaminar shear strength increased by 17.5% and the linear ablation rate decreased by 58.6% . 结果表明;“次氯酸氧化+KH550偶联”是提高复合材料层间剪切强度和抗烧蚀性能的有效方法;可使层间剪切强度提高17.;5%25;线烧蚀率减小58
- The short-beam shear testing method for determining the interlaminar shear strength of glass-cloth/epoxy laminates at low temperatures was studied using a three-dimensional finite element analysis. 采用三维有限元法对超低温下玻璃纤维强化树脂层合板的短梁法层间剪切强度进行了研究,通过与二维有限元解析结果的对比,分析了试验片三维形状对中性面上剪切应力分布的影响;
- Test method for interlaminar shear strength of glass fiber-reinforced plastics 玻璃纤维增强塑料层间剪切强度试验方法
- Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method 纤维增强塑料复合物。短束法对表观层间剪切强度的测定
- Experimental Characterization of Porosity and Interlaminar Shear Strength in Polymeric Matrix Composites 聚合物基复合材料中孔隙率及层间剪切性能的实验表征
- Test method for interlaminar shear strength of ring of filament-winding reinforced plastics 纤维缠绕增强塑料环形试样剪切试验方法
- Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics 玻璃纤维强化塑胶层间剪切力测量方法
- Keywords ablative material;carboncarbon;carbonpheno lics;interlaminar shear strength; 烧蚀材料;炭/炭;炭/酚醛;层剪强度;
- Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures 1-D和2-D连续的纤维加强的高级陶瓷层间的剪切强度试验方法
- Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method 纤维增强塑料的短梁层间切变强度法