您要查找的是不是:
- interlayer solid solution 层间固溶
- A solid solution of iron and up to 1 percent of carbon, the chief constituent of hardened carbon tool steels. 马氏本,马登斯体一种由铁和高达百分之一的碳组成的溶液,是硬化碳工具钢的主要成分。
- XRD spectra show that the bulk GaN particles are wurtzite structure, and the NC GaN has small domain size and the structure of solid solution phase. XRD结果显示经由气凝法合成前后氮化镓均为一六方晶系结构,利用块状氮化镓生成的奈米粉体粒径微细且是一种固溶相结构。
- A solid solution of iron and up to1 percent of carbon, the chief constituent of hardened carbon tool steels. 马氏本,马登斯体一种由铁和高达百分之一的碳组成的溶液,是硬化碳工具钢的主要成分
- A nonmagnetic solid solution of ferric carbide or carbon in iron,used in making corrosion-resistant steel. 奥氏体一种非磁性的固状可溶性含铁碳化物或含碳铁,用于制作不锈钢
- A nonmagnetic solid solution of ferric carbide or carbon in iron, used in making corrosion - resistant steel. 奥氏体一种非磁性的固状可溶性含铁碳化物或含碳铁,用于制作不锈钢
- A nonmagnetic solid solution of ferric carbide or carbon in iron,used in making corrosion - resistant steel. 奥氏体一种非磁性的固状可溶性含铁碳化物或含碳铁,用于制作不锈钢
- CIG precursor film is composed of Cu11In9 matrix phase. Ga exists mainly in solid solution by substituting In. CIG前驱膜是以Cu11In9为基础相,Ga原子主要是以替代In原子的固溶体形式存在。
- The solid solution of Sr_(1-x)Ca_xCuO_2 is investigated by means of XRD,EPMA and EDAXmethods. 本文用 XRD、EPMA、EDAX 等方法;研究了 Sr_(1-x)Ca_xCuO_2 固溶体.
- When ?x?>0.6, some TiO?2 enter CeO?2 lattice, and a CeO? 2-TiO?2 solid solution formes. x>0.;6时;一些TiO2已经进入了CeO2晶格;形成了Ce Ti固溶体。
- However Li_(14)Zn(GeO_4)_4 solid solution, being very sensible to CO_2 and H_2O,is unsta-ble in air. 但Li_(14)Zn(GeO_4)_4固溶体不稳定,在空气中对CO_2和H_2O很敏感。
- Ti43.5V49Fe7.5 and Ti46V44Fe10 alloys consist of a single solid solution phase with BCC structure. 而Ti43.;5V49Fe7
- The iron phase of Portland cement clinker is a member of continuous solid solution between C2F-C6AF2-C4AF-C6A2F. 硅酸盐水泥熟料的铁相,是C2F-C6AF2-C4AF-C6A2F连续固溶体。
- X ray diffraction analysis indicated that the materials prepared were single solid solution with layered structure. X-射线衍射分析表明,所得材料为层状结构的单一固溶体相。
- It is shown that ZrB2 can form solid solution with TiB2 and redound to gain uniform grains. 研究结果表明,ZrB_2可以较好的固溶到TiB_2中形成固溶体,并有助于细化TiB_2晶粒。
- Research shows that the deformational suspensoid solid solution is stable with outstanding shear resistance. 研究表明:形变悬浮胶体聚合物溶液稳定性好、抗剪切性能强。
- Morphology transformation of eutectic silicon in Al-Si alloy during solid solution was observed by OM and SEM. 通过金相和扫描电镜观察研究了铸造铝硅合金中的共晶硅在固溶热处理过程中的形态变化。
- There is no need for solid solution and overaging pretreatments in the superplastic deformation process. 可省去固溶与过时效预处理工序。
- The results show that Cu solubilizes in W and the substitutional solid solution is formed. 结果发现,铜固溶在钨中,并形成了置换固溶体。
- The microstructure of the alloys is the soft Sn particales distributing on the hard matrix of Al-Sn solid solution. 该合金的显微组织为硬的铝锡固溶体基体上分布着软的锡相质点。