您要查找的是不是：
- The isothermal quenching process of the ductile iron camshaft was analyzed. 摘要对球铁凸轮轴的等温淬火工艺进行了分析。
- The mechanical properties of nodular cast iron can be further improved by isothermal quenching. 等温淬火处理可进一步提高球墨铸铁的机械性能。
- The influences of isothermal quenching temperature on the retained austenite and mechanical properties of ADI were studied. 摘要研究了等温淬火温度对ADI中残余奥氏体及其力学性能的影响。
- We have decreased the warping distortion and increased wearing resistance of the cutting edge by adopting the method of whole martensite isothermal quenching and cutting ed... 采用整体马氏体等温淬火,刃口部位电火花强化的方法,既减少了翘曲变形,又提高了刃口耐磨性,使凹模寿命明显提高。
- The mechanical properties, structures, cutability and wear-resistance of full-bainite ductile iron obtained by using three kinds of isothermal quenching processes were investigated. 研究了由三种热处理工艺获得的全贝氏体等温淬火球铁的机械性能、组织状态及切削加工性能和耐磨性能。
- Isothermal Quenching Process of ADI for Crangkshaft 等温淬火工艺对铸件组织和性能的影响
- isothermal quenching temperature 等温淬火温度
- Study on Isothermal Quenching Process of ADI for Crankshaft 球墨铸铁曲轴等温淬火工艺的研究
- Keywords Precooling isothermal quenching;Deformation variable; 预冷等温淬火;变形量;
- Keywords Isothermal quenching ADI;Drive wheel;IRS control arm; 关键词等温淬火球铁（ADI）;驱动轮;悬架控制臂;
- Approaching on Cutting Pick Isothermal Quenching inside Gas Carburizing Furnace 用气体渗碳炉进行采煤机截齿等温淬火的工艺探讨
- Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test . 通过对截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效性，并从实验上对该工艺进行了验证。
- Comparison of two heating methods of isothermal quenching used for ADI friction wedges ADI斜楔的两种等温淬火加热工艺的比较
- The phase transition process of isothermally quenched ductile iron was investigated,the author's opi... 研究了等温淬火球铁的相变过程,指出了对等温淬火球铁组织命名的看法。
- So we find that hardening operation is made up of heating and quenching. 因此我们发现淬火工序包括加热和淬硬两个步骤。
- Process Research on the Isothermal Quenching of Ductile Iron of Austenite and Bainite 奥氏体贝氏体球铁等温淬火工艺研究
- Isothermally quenched ductile mm (austempered ductile iron, ADI) is a relatively new material to engineering industries. 摘要等温淬火球铁(ADI)对工程界来说是一种相对较新的材料。
- Nothing could quench her longing to return home again. 她重返家园的念头怎么也打消不掉。
- Study on Isothermal Quenching and Electric Spark Strengthening for Large Type Cavity Die with Thin Wall 薄壁大型腔凹模的等温淬火与电火花强化
- The result showed that isothermally quenched white iron had relatively high hardness and toughness so that it was a kind of economical and practical anti-wear material. 结果表明,等温淬火白口铸铁兼有较高的硬度和韧性,是一种经济实用的抗磨材料。
