您要查找的是不是：
- laminar layer contact element 薄层接触单元
- The laminar layer was layer-shape structure and was comprised of reticulae fibre and irregular electron-dense granular,but the structure was dense in Tibetan sheep original sample and was scatter in yak origin-al sample near germinal membrane. 角质层由纤维物质和不规则形颗粒形成层状结构，但近生发膜处藏羊源的结构致密，牦牛源的则较为疏松。
- Axial vortex forms on pipe wall while fluid flows onto flute, so strengthening disturbance of boundary layer and destroying laminar layer to promote heat transfer through boundary layer. 当旋涡快要消失时流体又经过下一个凹槽处,这样就能使旋涡不断的产生、不断的消失,保持了连续而稳定的强化作用。
- Secondly, the three nodes contact element obeying the elastic Coulomb friction constitutive model is presented. 并介绍了服从弹性库仑摩擦本构模型的三结点接触单元。
- Additionally, the stressand displacement of contact element are analysed, and the contact condition between"soft adapter" and rockfill dam are studied. 另外,还分析了接触单元的受力、变形情况,研究“软接头”与堆石坝之间的接触情况。
- For higher speeds, contact elements made of PTFE can be used. 如应用场合的速度更高,应选择用PTFE材料制造的接触件。
- The effects of compatibility and shear rate on size and shape of laminar layers are apparent. 体系相容性和外剪切场对层状平板的尺寸及形状有明显的影响。
- The developed contact element has the ability to simulate each of the contact stage such as separation, sticking and frictional sliding. 所建立的接触元能模拟接触的各个阶段，如分离、粘附或有摩擦的滑移。
- laminar layer bottom water reservoir 薄层底水油藏
- S.H .Ju.J .J Stone and Rowlands,1993”A New Symmetric Contact Element Stiffness Matrix For Frictional Contact Problems,” Computer &Structure Vol.54.No.2.pp.289-301. 黄冠伦，2007，”考虑接触效应之海底埋管有限元素分析”，硕士论文，国立中兴大学土木工程研究所。
- The arithmetics of contact element, including three aspects of interface condition, Coulomb friction type and the weak formulation of interface condition are investigated in detail. 在接触单元的力学机理方面,从接触界面条件、Coulomb摩擦类型和接触界面条件的弱形式等三个方面对接触单元的算法进行了详细的研究。
- You could have contact elements with no name, and ones with several ages - neither of which meets the semantic requirements. 造成可能有些联系人元素没有姓名,并且有些元素有几个年这些都不符合语义要求。
- Contact elements are set between end plate, angles, T-stub and column flange, screw cap and neighborhood plane, bolt bar and hole. 分析中,建模时端板与柱翼缘,角钢和T形连接件与柱翼缘和梁翼缘,螺栓头(帽)与相邻板件间,螺栓杆与孔壁间都设置了反映边界状态的接触单元。
- During the simulation,the Mohr-Coulomb model was used and contact elements were applied on the interfaces between the structure and soil. 计算中采用摩尔-库仑弹塑性模型,基坑围护结构与土体之间的接触面运用接触单元。
- This layer of rock contains a lot of flint. 这一岩层中有大量燧石。
- She cast her eyes down to avoid direct eye contact. 她垂下双目以避免对视。
- It used the classical coulomb friction law to model the friction between contact surfaces and introduce the so-called fictive contact elements for numerical calculation. 文章指出，这里采用的求解接触问题方法在研究断裂力学中裂 纹的张闭扩展问题时也有意义。
- The inner layer of the wall of a spore. 孢子内壁孢子壁的内层
- There is a fine layer of dust on the desk. 桌子上有一层薄薄的尘土。
- That poor madam has lost all contact with reality. 那位可怜的夫人脱离了现实生活。
