您要查找的是不是:
- Laser Heat Treatment of WC Co Hardmetal[J]. 引用该论文 朱祖昌;王维荣.
- Laser heat transfer printing has many applications. 激光热转印技术正在被广泛使用。
- YANG Xi-chen.Studying on laser heat treatment broad band facula [J].Laser Application. 1990 (18): 13-16. [8]杨洗陈.;激光热处理宽带光斑的研究[J]
- Z]Good coating materials for absorption of laser in laser heat treatment (LHT)must be of high and steady absorption rate of laser spectrum. 理想的激光热处理吸收涂层必须在高温下具有高而稳定的光谱吸收率。
- Using this model, parameters of laser heat treatment can be determined for a required quenched depth and surface area processed per unit time. 仅由此曲线族,即可根据要求的淬火层深度以及单位时间处理的表面积,计算确定激光热处理的参数。
- This paper reported the bending strength improvement with relation to cobaltic phase structure of laser heat treatment in the surface of cemented carbide. 报道了经激光处理后硬质合金表面抗弯性能的提高及其与钴相结构的关系。
- Nd:YAG Laser heat conduction welding is one of important laser welding mode which is applied to welding of thin parts. 激光热导焊是激光焊接中一种重要的焊接模式,广泛应用于薄件的焊接中。
- Laser Weld and Laser Heat Treatment 激光焊接与激光热处理
- Steady-state laser heating: estimation of the temperature distribution. 稳定状态的激光加热:温度分配的估算。
- After that, the thermal deformations are insensitive to laser heating times. 其后,随著激光照射时间的增加,热变形增加量逐步变缓。
- Study of beam parameters expression in laser heat treatment 激光热处理中光束参数表述问题研究
- Research on Laser Heat Treatment of Car Carpet Cutter 轿车用地毯刀具激光热处理工艺研究
- Laser Heat Treatment of Shift Ring of Automotive Synchronizer 汽车同步器拨档环激光热处理
- A control circuit of the work-bench for CO_2 laser heat treatment CO_2激光热处理工作台控制电路
- CeO2 superfine powder was well prepared by laser heating gas-evaporation method with a 150 W CW CO2 laser as light source and Ce2(CO3)3 as targets. 以单模100WCWCO2激光器为光源,碳酸铈为靶材,采用激光蒸凝法制备出了氧化铈纳米粒子。
- Therefore, volumetric heating model should be the only choice for computation relating to picosecond and femtosecond laser heating. 皮秒和飞秒激光辐照的热效应须用体加热模型计算。
- Laser heat treatment on nitrogen ion-implanted ARMCO iron specimens 纯铁离子注氮后的激光热处理
- When switched to low-power, the laser heats the dermis, which stimulates new collagen production over time.This new collagen will improve the structure and elasticity of the skin. 当切换到低功率,激光加热真皮,刺激新的胶原蛋白的产生,随着时间的推移,这种新的胶原蛋白会改善结构和皮肤的弹性。
- Moreover, an anomalous redshift of the UV peak position with diminished wire diameter was observed.We attribute this redshift to the effects caused by the laser heating. 此外,随线径变小,紫外光发光中心位置会有红移现象,我们推测此红移可能是热效应所造成。
- Laser heating and melting and laser-produced transient shock waves together lead to the densification of the microstructure in the surface and sub-surface. 激光引起的加热熔化和激波效应同时使表层组织致密。