您要查找的是不是：
- latent heat load 潜热负荷
- A similar definition holds good for latent heat of vaporization. 气化潜热的定义与此雷同。
- With a project examples, calculates the latent heat by pool water evaporation, and concludes that the pool water evaporation is an important factor influencing air conditioning load. 结合工程实例，计算了池水蒸发潜热量，得出池水蒸发潜热负荷是空调负荷的一个重要影响因素。
- The half-year cycle of latent heat flux exists in the Xisha area, with the maximum appearing in winter. 西沙海面潜热通量存在半年周期特征，极大值也是出现在冬半年。
- Moreover, superheat will last a shorter time with the heat load increasing. 其次，热流密度越大，过热时间维持的越短；
- The Effect of Latent Heat Release on the Evolution of a Warm Occluded Thermal Structure. 潜热释放对热固囚热结构的作用。
- The resulting system has an even heat loading. 这样的系统有均匀的热负荷。
- In this case latent heating and radiation cooling are comparable. 在这种场合，潜热加热和辐射冷却数值相当。
- The results show that vorticity advection, thermal advection and latent heat release made great contribution to the development of the depression. 中低层的温度平流、降水凝结释放潜热维持上升运动，是低压进一步发展的有利条件。
- Heat arriving at the interface is immediately converted to latent heat of vaporization (the water boils). 到达接口的热立刻被转换成潜在汽化热(水煮沸)。
- The specific latent heat is the difference in enthalpies of the substance in its two states. 比潜热是物质在两种状态下的焓差。
- The low-temperature blown gas discharged from the fixed-bed intermittent gasifier contains high latent heat. 固定层间歇式煤气发生炉排放的低温吹风气具有较高的潜热。
- An innovative humidification system allows a high relative humidity even with a heat load. 独创性的加湿系统即便在有热载荷时,也能提供高的相对湿度。
- Thermal energy storage are the technologies that make use of latent heat stored by Phase Change Materials (PCMs). 蓄热技术利用相变材料（Phase Change Material，PCM）的相变热来储存热能。
- From magnetic fields in PF coils of EAST expressed as elliptic integrals, the heat load of PF coils during plasma discharge is determined. 摘要通过求解椭圆积分，计算了EAST极向场系统的磁场分布，从而计算出极向场线圈在等离子体放电过程中的热负荷。
- The results show that melting latent heat of the cool storage material is 149kJ/kg, phase change tempera. 通过实验方法研究了空调蓄冷材料的相变温度、相变潜热和比热等热学性能。
- These methods have been used in the actual airplane cabin thermal process and heat load tests successfully. 这些方法已成功地应用于飞机座舱热载荷和热特性试验中。
- The model couples temperature with latent heat in its calculation. quenching process of a T8 ... 用此模型对T8钢淬火过程进行计算机模拟，计算结果令人满意。
- To decrease the radiation heat load of the cryopanel is conside red to be necessary for the design of cryopumps. 减小低温板的辐射热负荷是低温泵设计中的关键问题。
- The latent heat in the PCIM can largely increase the heat capacity of the insulation material. 当环境温度低于一定值时，相变材料有液态凝结为固态，释放热量；
