您要查找的是不是：
- The Research for Control System of Nine Phase Linear Oil Pumping Motor 九相直线电磁抽油机控制系统
- Taian Wuzhou Oil Pump And Oil Nozzle Co., Ltd. 泰安五洲油泵油嘴有限公司。
- Excavation for fuel oil pump house is in progress. 燃油泵房开挖工作正在进行。
- Activates the auxiliary oil pump. 辅助油泵激活按钮。
- Stop the running of one oil pump of the electric motor. 停止电机一油泵的运转。
- We are looking for supplier of oil pump PARTS brand name CTR. 我们需要求购汽车机油泵，请联系我们。
- The pressure of lube oil pump increases very slowly. 机油泵压力增长很慢。
- The control technology of linear motor oil pump is the key part to determine the success or failure of work.This article has maken more reasonable control programmes and applied at the test field. 直线电机抽油泵的控制技术是决定实验成败的关键环节，针对其工作状况，提出了较为合理的控制方案，并在现场得到应用。
- Automatic oil pump and fault alarm syster, dygnosis and instructions. 自动注油,自动故障报警、诊断,指导处理。
- BEIJING CITY GUOXING AUTOMOBILE OIL PUMP FACTORY MANUFACTURING CO., LTD. 北京市国兴汽车油泵制造有限公司。
- Exhibits: Forging, brake disc, DrivingShaft, engine, oil pump, Steering Gear. 展品锻件、制动系统、传动轴、水泵、机油泵、转向器。
- Main products: oil tank, oil tube, oiler support, oil pump, oil applying wheel etc. 产品主要结构：油箱、油管、安装支架、油泵总成及涂油轮等组成。
- This paper proposes a design project of the dynamoelectric accelerograph control system of X-aeroengine oil pump modulator. 提出了一种某航空发动机油泵调节器电动油门控制系统的设计方案。
- Robust design of adjustable linear oil damper 可调油压减振器的稳健设计
- The rubber formulation of oil pump bushing was designed by orthogonal testing method design for on NBR(N - 41 ). 选用丁腈橡胶（N-41）为基础胶，利用正交试验法设计出抽油泵衬套橡胶配方。
- The oil pump should be close to the oil tank as possible as it can, the suction height should be no more than 500mm. 油泵应尽量接近油箱,吸入高度不得大于500毫米。
- The oil pump should be firmly fixed; the inlet and outlet pipe should be fastened without loose. 油泵应牢固地加以固定,进出口管接头,不得有松动现象。
- Supply diesel oil to engine, to ensure the reliability of the engine. To fit inline type high pressure oil pump. 向发动机供柴油,以确保发动机可靠工作。与直列式高压油泵匹配。
- Pre-heating oven.Oil heating for bronzing plate, constant temperature auto control, oil pump circulation. 烫金版油加热,恒温自动控制,油泵循环。
- Turn “Light Oil Pump Run” switcher to “ON” position and make sure the ignition burner is lit. 将“轻油泵运行”转换开关转到“运行”，并确认点火燃烧器已点着。
