该词条未找到_海词词典

您要查找的是不是：

Intense, glowing copper! Applied wet it's like liquid metal. 强烈的铜色!湿用时像是液态金属。干用时是古铜带银的亮片。
The results show when the triplex electro-hydraulic servo actuator system is applied, the dynamic performance has a little difference. 分析结果表明：伺服作动系统采用余度控制后，系统的动态品质基本不变。
Xia Liqun , Zhang Xinguo.Development of DDV (direct drive valve) servo actuator[J ].Journal of Northwestern Polytechnical University,2006,24 (3) :308-312. (in Chinese) . [2] 夏立群;张新国.;直接驱动阀式作动器研究[J]
In order to improve the reliability of servo system, a triplex electro-hydraulic servo actuator system with three torque motors, three jet flapper valves and three sets of feedback components is designed. 摘要为了提高伺服作动系统的可靠性，设计了一种三余度的电液伺服作动系统，将伺服阀的力矩马达、喷嘴挡板阀、系统的反馈元件等做成一式三份。
Mercury, the liquid metal that is used in many thermometer, is very much heavier than water. 许多温度计中应用的液体金属--水银比水重得多。
This result proves that redundance control greatly improves the reliability of the servo actuator system, and provide the theoretical bases for the design of the servo actuator system with good performance. 结果表明：伺服作动系统采用余度技术后，系统性能基本不变，而大大提高了伺服作动系统的可靠性，为高性能伺服作动系统的研制提供理论依据。
To form(liquid metal,for example) into a particular shape by pouring into a mold. 铸造通过把（如金属熔液）注入一个模具，使它具有一个特殊形状
A current is sent transversely through the liquid metal, in a direction at right angles to a transverse magnetic field. 使电流横穿过液态金属，其方向又与横向磁场垂直。
Words and Expressions cast vt. To form (liquid metal, for example) into a particular shape by pouring into a mold. 铸造;通过把(如金属熔液)注入一个模具,使它具有一个特殊形状。
To form(liquid metal, for example) into a particular shape by pouring into a mold. 铸造通过把（如金属熔液）注入一个模具，使它具有一个特殊形状
The MHD effect on liquid metal free surface jet flows under magnetic field has been investigated. 摘要分析了磁流体力学效应对液态金属自由表面射流稳定性的影响。
Research on Mechanical-hydraulic Servo Actuator 机液伺服执行器的研究
The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
Conical-hydrostatic servo actuator 圆锥静压伺服作动器
Abstract: The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 摘要: 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
Electro-hydraulic servo actuator 电液舵机
The methods of denitrogenation from liquid metal by flux, vacuum and bubble carrying are reviewed in this paper. 本文综述了金属液熔渣脱氮、真空脱氮和气泡携带法脱氮方法。
Electric field of the emission system of a liquid metal ion source was simulated, based on the conventional dynamic protrusion model and the widely used charge simulation method. 摘要发射系统是液态金属离子源的关键部件之一，它的性能的优劣直接影响到整个离子源的工作稳定性和可靠性。
The liquid metal flow during mould filling in bottom gating system and its influence on the casting quality are introduced emphatically. 着重介绍了液态金属在底注式浇注系统充填型腔时的流动，以及其对铸件质量的影响。
Abstract: Porosity of die castings caused by air entrapped into the liquid metal in the shot sleeve is common problem of die csating process. 文摘:压室中气体卷入金属液内而造成压铸件内部气孔是压铸过程常见的问题。