您要查找的是不是：
- White - hot liquid iron is running off through the tapping hole. 白灼的铁水从出铁口流出。
- White-hot liquid iron run off through the tapping hole. 白灼的铁水从出铁口流出。
- White - hot liquid iron runs off through the tapping hole. 白灼的铁水从出铁口流出。
- In an iron thermite reaction, iron oxide reacts with aluminum and comes out as liquid iron. 在铁的铝热剂还原反应中，铁的氧化物与铝反应，从而生成液态铁。
- White-hot liquid iron is run off through the tapping hole and then is taken to the converter,open-hearth furnace or electric furnace to be made pure. 炽热的铁水从出铁口流出，然后被送到转炉，平炉或电炉提纯。
- White-hot liquid iron is run off through the tapping hole and then is taken to the converter, open-hearth furnace or electric furnace to be made pure. 炽热的铁水从出铁口流出，然后被送到转炉，平炉或电炉提纯。
- Consequently,knowledge on the shear viscosity of liquid iron will help us to understand the working mechanism of the the Earths magnetic field. 研究外核液态铁的剪切粘滞度对认识地球磁场的运转机制具有非常重要的意义。
- Two separate periods are identified:the iron shell period and melting period,after immersion of ferrosilicon into liquid iron. 结果表明:硅铁浸入铁液至完全熔化分为两个时期,即铁壳期和熔化期;
- The kinetics of the reduction of phosphate in molten slag by solid carbon,carbon in liquid iron saturated with carbon and phosphorus and CO gas was studied. 对固体石墨碳、Fe-P-C饱和熔体、CO气体还原熔融磷渣中磷酸盐的反应动力学进行了研究.
- Its a consensus that the flow of liquid iron in the outer core generates the Earths magnetic field.One of the key factors that control the flow is shear viscosity. 地球外核液态铁的不断流动造成了地球磁场，决定这一流动的基本性质之一是剪切粘滞度。
- According to variation of slag oxidizability and basicity with time, the routes of slag formation during smelting medium and low phosphorus liquid iron were discussed in detail. 为此从炉渣碱度和炉渣氧化性两个方面讨论了复吹转炉冶炼低磷铁水和磷含量较高的铁水的成渣路线。
- An iron cleaning agent that consists of limestone and lime. These products react with impurities in the metallic pool and float to the top of the liquid iron. 熔融一种由石灰石和石灰组成的铁清洗剂。清洗剂与金属槽中的杂质发生反应，飘浮到铁液的表面。
- It is emphatically expounded the effects of vanadium,titanium,silicon and sulphur on viscosity,melting temperature and solidifying point of liquid iron. 简介了所采用的测试研究方法，着重论述了钛、钒、硅、硫单因素及其综合因素对铁水粘度、熔化性温度和凝固点的影响。
- This paper introduces the structural feat ure, technical requirement and design process of the pallet body in6# sinter as well as the nodularizing inoculation treatment process during the liquid iron. 介绍了6%23结机台车体的结构特点、术要求及台车体的设计工艺和铁水熔炼过程中的球化孕育处理工艺。
- The deoxidation of liquid iron with CaSiV, CaMgSiV, CaSi-BaAl and CaSi complex alloys and the behavior of deoxidation products were studied in laboratory, stirring-free and protected with Ar. 在实验室条件下(没有熔池搅拌,氩气保护),研究了铁液中CaSiV、CaMgSiV、CaSiBaAl及CaSi等Ca系复合合金的脱氧和脱氧产物的行为。
- This paper introduces the structural feat ure,technical requirement and design process of the pallet body in6 # sinter as well as the nodularizing inoculation treatment process during the liquid iron. 介绍了6%23烧结机台车体的结构特点、技术要求及台车体的设计工艺和铁水熔炼过程中的球化孕育处理工艺。
- Introduce the application of liquid iron desulphuration in North America from injection method, reactant test, lead pretreatment, twin-tunnel lance technology, deslagging operation. 从喷吹方法、反应剂试验、铅预处理、双道喷枪技术、除渣操作几个方面介绍了铁水脱硫在北美的应用。
- Most synthetic detergents are in the form of powder or liquid. 大多数合成洗涤剂呈粉状或液态。
- Be careful not to lose too much liquid by evaporation. 小心，不要因为蒸发作用而失掉过多的水份。
- The surface of the liquid gradually crusted over. 液体表面渐渐地结了一层皮。
