您要查找的是不是：
- Which of the test part characteristics listed below are normally considered before the specific liquid penetrant test method is selected? 选择液体渗透试制方法时，通常要考虑下面列出的哪些零件特性？
- dye liquid penetration test 着色探伤
- liquid penetration test 液体渗透试验
- 3.Which of the test part characteristics listed below are normally considered before the specific liquid penetrant test method is selected? 选择液体渗透试验方法时，通常要考虑下面列出的哪些零件特性？
- Method for liquid penetrant testing and classification of the indication 液体渗透探伤测试方法及表示方法分类
- Simulation of penetration test of armoured plate is presented by explicit dynamics algorithm. 摘要采用显式动力学算法对装甲材料侵彻试验的过程进行数值仿真研究。
- This article narrates a innovated dynamic penetration test method that mainly corroborates soil bearing capacity . 探讨了一种改进的动力触探方法,主要用于确定土的承载力。
- The liquid penetration method, procedure, defect indication and indication characters of pipe welds in boiler were described simply in this article. 对锅炉管道焊缝液体渗透检测方法、操作程序、缺陷显示及痕迹特征作了简单介绍。
- liquid penetrant test 着色探伤,渗液探伤试验
- In addition, the compressive strength, absorption rate, rapid chloride penetration test (RCPT) and chloride ion diffusion test were performed. 此外并进行各项试验其中包括抗压强度、吸水率、快速氯离子渗透试验(RCPT)、氯离子扩散试验及混凝土电阻试验等探讨高性能混凝土的耐久性。
- The standard penetration test(SPT)of base-pile of the artificial bored pile is very essential according to the feature of this project. 根据本工程实例情况,人工挖孔桩桩底标贯试验是非常必要的。
- liquid penetrating test [化] 渗透探伤
- The static cone penetration test formula for vacuum preloading foundation in soft soil area has never reported in China. 软土地区地基真空预压处理后静力触探经验公式在国内未见报道。
- Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing 磁粉和渗透检验中目视校验计较准方法的确认
- The BfR combat boot has been tested for water resistance using the SATRA Dynamic Footwear Water Penetration Test. BfR战斗靴已按SATRA鞋类动力渗水测试进行防水测试。
- Simulated by WSI at 5G position, the INCONEL 52M TIG weld passed Liquid Penetrant inspection (LP) and Ultrasonic test (UT) thoroughly, no any defects observed. 经WSI模拟5G位置TIG焊测试,INCONEL52M的TIG 焊缝完全通过液体渗透探伤(LP)和超声波探伤(UT),未发现任何缺陷。
- Non-destructive testing -- Penetrant testing -- Part 1: General principles -- Method for liquid penetrant testing and classification of the penetrant indication 渗透性检验。第1部分:总则。液体渗透检验方法和渗透指示的分类
- The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed. 结果表明:微观缺陷主要包括微孔和夹杂,其中微孔由微气孔和微缩孔组成,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。
- Through the standard penetration test (SPT) the plug behavior of PHC piles in silty sand and the influence to the characteristics of the soil around PHC pile by driving or jacking methods are studied. 采用现场标准贯入试验,分析了粉砂土中PHC管桩的土塞特性、不同沉桩方式对桩周土力学性能的影响。
- Piezo-cone penetration test was developed in the measurement method, design of pore-pressure unit, mini-size and multi-type of cone, in-time transmitting of data and the method of analysis. 带孔压测量的圆锥触探试验在测量方法、孔压测量单元设计、探头的小型化和多样化、数据的快速传输以及分析理论方面的进展；
