您要查找的是不是:
- Lower formaldehyde emission. Because the higher the temperature: The more formaldehyde emission: in the winter relatively closed room use: more likely to be exceeded. 甲醛释放量要低。因为温度越高:甲醛释放量越多:在冬季相对封闭的居室内使用:更可能会超标。
- Study on Preparation of Low Formaldehyde Emission UF Resin and It's Properties 低醛化脲醛树脂的合成与性能研究
- The curing agent systems and curing characteristics for urea-formaldehyde resin with low formaldehyde emission 低甲醛释放脲醛树脂的固化剂体系及其固化特性
- Determination of Free Formaldehyde of Wood-based Panels with Low Formaldehyde Emission 浅议低游离甲醛人造板中游离甲醛的测定
- LOW FORMALDEHYDE EMISSION PARTICLEBOARD AND MEDIUM DENSITY FIBERBOARD OF LOW MOLAR RATIO UF RESIN WITHOUT DEHYDRATION 用不脱水低摩尔脲醛树脂制造低游离甲醛刨花板与中密度纤维板
- The new progress of urea-formaldehyde resin with low formaldehyde content and its wood-products with low formaldehyde emission 脲醛树脂胶粘剂及其制品低毒化研究新进展
- low formaldehyde emission 低毒
- Formaldehyde emission from cured substance of three kinds of low toxic UF resin through different curing system with environment change was studied. 对不同固化体系下三种低毒脲醛树脂固化物随环境变化的甲醛释放量进行了具体研究。
- The vesults of our vesearch on low toxicity UF resin for grade of extruded particleboard( perforated) showed: The formaldehyde emission of extruded particleboard made from low toxicity UF resins could meet E2 standard, and E1 standard. 对低毒脲醛树脂制造挤压刨花板(空)研究结果表明:采用低毒脲醛树脂,不仅挤压刨花板甲醛释放量可以满足E2级标准,而且甲醛释放量可以满足E1级标准。
- By MDF manufacturing experiments on a laboratory scale with low toxic modified UF resin adhesive,formaldehyde emission is 4.19mg/100g tested by perforator method reaching ? grade of German norm. 在实验室条件下,用低毒改性UF胶压制中密度纤维板,用穿孔碘量法测得成板的游离甲醛释放量为4.;19mg/100g,达到了德国E_1级。
- Formaldehyde emission of melamine-modified UF resin was lower than that of unmodified. 用三聚氰胺进行改性的脲醛树脂的甲醛释放量明显低于未加任何改性剂的脲醛树脂。
- The behavior of formaldehyde emission from medium density fiberboard (MDF) is a function of time elapsed. 在MDF甲醛释放蠕变过程中,MDF甲醛释放驱动力保持不变时,MDF甲醛释放量随时间延长而变化。
- It is shown that modified DMDHEU is low formaldehyde resin and the shrinkage of treated lining cloth has been reached the factory de_mands. 结果表明,多元醇醚化的改性2D树脂为低甲醛树脂,其整理的衬布缩水率完全达到生产要求。
- Poor water resistance and high formaldehyde emission (FE) are two main problems of the medium density fiberboard (MDF) produced in our country. 耐水性差、游离甲醛释放量高是我国中密度纤维板(MDF)存在的两个主要问题。
- Details of regulation / testing method can be consulted in SGS Laboratory, attached the introduction of Formaldehyde Emission for perusal. 但是今天一早还是收到她的询盘,产品各部件很详细,肯定是个专业的采购机构。
- The paper discusses the process of co-bath finish for cotton fabric with low formaldehyde finishing agent ULF-1 and reactive dyes. 对棉织物用 UL F- 1低甲醛整理剂与活性染料同浴染色、整理的工艺进行了探讨。
- The formularies and can be received and used to describe the influence of the placed time of sawed test piece to the plywood formaldehyde emission. 凯尔文模型较好地模拟了胶合板甲醛粘弹性释放特征;
- Our products fit in with RoHS and PAHs standard. We only use plywood which reach the standard of National CNS Formaldehyde Emission F3 level. 荣隆木业所采用的加工板皆符合国家CNS甲醛释放量F3等级以上.
- Blockboard gave the highest formaldehyde emission level in large cham ber test.Formaldehyde emission rate of the wood-bas... 大室法条件下的人造板甲醛散发速率呈指数函数规律衰减,给出了大室法条件下人造板甲醛散发量水平的预测公式。
- Even if low formaldehyde resins are used the fabrics may not reliably meet the kids formaldehyde limit of 20 ppm and should not be used on infants and little kids garments. 即使低的甲醛树脂被用织物可能不可靠地遇见 20个百万分之一的小孩甲醛界限而且不应该在婴儿和小小孩衣服上被用。