您要查找的是不是：
- low frequency pulp screen 低频筛浆机
- high frequency pulp screen 高频筛浆机
- In electronics, undesirable low frequency currents interfering with a desired signal, and usually caused by a poorly screened alternating mains supply. 在电子学领域，一种不希望发生的低频电流，它干扰所要求的信号。通常这种现象是由于交流供电线路屏蔽不良引起的。
- An external pop protection screen may be necessary when close-miking vocalists.The use of a low frequency cutoff filter may also be effective. 当麦克风很靠近演唱者时，可能需要加一个外部静电噪音保护屏，使用一个低频截频滤波器也可能有效。
- The abnormal colours of seedlings turned a low frequency. 颜色异常的苗木出现频率较低。
- Laser direct writing of micro-OVD with low frequency templates[J]. 引用该论文 魏国军;周小红;周雷;陈林森.
- If it is a low frequency sound, it is processed as an analog signal. 对低频声进行传统的处理。
- The direction of the low frequency current with maximum frequency was also WSW. 低频流出现频率最多的方向和潮流基本一致。
- Used in paper industry for pulp screening after knot removed and washed clean. 用于制浆造纸行业对除节洗净后的纸浆筛选。
- This effect is obvious at lower frequency band. 这种效应在振动低频区段更为显著。
- SD series pressure screen an inflow pressure screen, is a kind of advanced paper pulp screening equipment. 本系列压力筛为外旋翼内流压力筛，是一种先进的纸浆筛设备。
- Medium SMES (200 MVA) are able to compensate some low frequency disturbance. 中型SMES(200MVA),这类SMES能补偿某些低频度的扰动
- Helmholtz resonator has a good noise eliminating performance at low frequency. 亥姆赫兹共振腔具有良好的低频消声性能,被广泛地应用于低频消声方面。
- Armstrong was forced to use avery low frequency barely above audibility. 当时这样的频率被认为是“高频”，但只不过是现在所用调幅波段的底部而已。
- Peak indicator light and LF (low frequency) switch per mono channel. 每路单声信道具有峰值指示灯及低频切除开关。
- Purpose:Low frequency power amplifier,medium speed switching applications . 用途:用于低频功率放大及中速开关。
- Note: Close woundcoils will resonate at a slightly lower frequency. （注：密绕的线圈将会谐振在稍低的频率。）
- Very little effort has been devoted to the experimental measurement of low frequency combustion response. 在低频燃烧响应的试验测定方面只做了很少的工作。
- In audio, a very low frequency oscillation often resulting from a positive feedback path in an amplifier system. 在音响设备中出现的振荡频率极低的低频振荡，常因放大系统的正反馈回路引起。
- Starting with your EQ flat, remove ALL be bottom end by turning the low frequency control to full cut. 在开始得时候;让你得eq保持平治(零)然后对低频做低切.
