您要查找的是不是：
- The formula contains trace amounts of halogens, low melting metals and is low in chlorides. 适合书写在不锈钢或任何表面含降解、污染或其它不利因素影响亦被关注。
- low melting metal 低熔点金属
- The main body, tiger shaped hook handle and feet were cast separately respectively, then welded together by the terne metal with low melting point. 尊主体、虎形提梁和虎形足分别单独铸造后，以低熔点锡铅合金焊接成一体；
- Account should be taken of the low melting point of this substance. 应该考虑到这种物质的熔点低.
- Bismuth alloys are used (because of their low melting points) in making metal castings, special solders, automatic sprinkler heads, fuses, and many fire-detection devices. 铋合金熔点低,可用于金属铸造、特种焊料、自动喷水头、保险丝以及许多防火设备。
- Burning-in technique was applied widely in casting complex bronze wares.The burning-in in the Warrior States mostly adopted the terne metal with low melting point. 铸焊技术在复杂青铜器铸造中有广泛的应用，战国时期的铸焊多用低熔点铅锡合金。
- Molten metal is poured back into the moulds. 已熔的金属被倒回注入到铸模里。
- The molten metal channels into the troughs. 熔化的金属液流入槽中。
- In factories,workers use it to melt metals. 在工厂，工人们用火去融化金属。
- The molten metal was run into a mould. 熔化的金属被倒进模内。
- Polypropylene(PP) had poor foamability because of its low melt strength. 聚丙烯(PP)熔体强度低,发泡性能差。
- A halogen element, F, is major raw materials deriving fluorine compound, and because of low melting point, that is widely used in steelmaking, nonferrous metal smelting, cement, glass and ceramics. 萤石中含有卤族元素氟，是制取含氟化合物的主要原料，又由于熔点低而广泛用于炼钢、有色金属冶炼、水泥、玻璃、陶瓷。
- They poured the molten metal into molds. 他们把熔化了的金属浇灌到模子里。
- Molten metal ran out on to the flagstones. 熔化的金属溢流到外面的板石上。
- The molten metal was run into a mould . 熔化的金属被倒进模内。
- They ran the molten metal into a mould. 他们把融化的金属倒进模子里。
- Aliphatic polyesters are not used for fiber production, because of their low melting points. 脂肪族聚酯没有用来生产纤维，可能是熔点低的缘故。
- Due to the formation of low melting calcium-aluminates the corrosion resistance and hot erosion strength are reduced. 由于低熔点的铝酸钙的形成,火砖的抗腐蚀能力和抗热蚀强度降低了。
- The slag system has characters of low melting point,high optical basicity and good desulfurizing capacity. 该渣系具有熔点低、光学碱度高、脱硫能力较强的特点,脱硫率达到80%25。
- Melted metal is poured into a mold to harden into shape. 熔化之金属倒入模子中以冷却成形。
