您要查找的是不是:
- Low density polyethylene(LDPE) modified asphalt dispersed finelyin asphalt is prepared by two-step blending process. 采用二阶共混法制备了能在沥青中微细分散的LDPE改性沥青。
- Constructed of low density polyethylene (LDPE): a durable, lightweight and FDA food grade approved material. 修建低密度聚乙烯(LDPE):耐久,轻量级选手和粮食与药物管理局食品等级批准了材料。
- The rheological behavior was studied for blends of metallocene catalyzed ethylene/1-butene copolymer(mPE) and low density polyethylene(LDPE). 研究了茂金属催化乙烯 丁烯 1共聚物mPE和LDPE共混物的流变行为 .
- It is used for blowing various plastic film of low density polyethylene(LDPE),high density polyene(HDPE)and linear low density polyethylene(LLDPE)etc. 用于吹制高低压聚乙烯,产品广泛用于复合膜,包装膜,农业复盖腊,纺织品,服装袋或膜等包装;
- Biaxial self-reinforced metallocene linear low density polyethylene sheet was prepared by the die with complex stress field in solid state. 主要采用一种具有复合应力场的挤出口模,通过固态挤出茂金属线性低密度聚乙烯获得双向自增强片材。
- This paper altered one plastics character by physically blending in other plastic while keeping low density polyethylene as a basic part. 文章以目前导爆管的管壁材料低密度聚乙烯塑料为主体,对塑料原料进行物理共混改性。
- White LDPE Scrap (loose) , White LDPE Scrap (loose) shall consist of sorted white Low Density Polyethylene (LDPE) scrap. 白色LDPE小块(散装)将包括被分类的白色低密度聚乙烯(LDPE)小块。
- Furthermore, the inner layer is made low density polyethylene which can remove the static can avoid static generation inside the bag. 另外里面一层是由可消除静电乙烯组成,可以防止在袋内产生静电。
- Results of measurements of the electrical conductivity of low density polyethylene (polystyrene)polypyrrole composites are reported. 介绍了低密度聚乙烯(聚苯乙烯)/聚吡咯复合材料的导电特性。
- The fisheye problems appeared in the post processing of linear low density polyethylene(LLDPE) blown film were discussed. 探讨了吹膜后期加工过程中出现的晶点问题,指出在催化剂制备过程中,应当严格控制反应物中的杂质含量;
- Reproducibility of electrical conductivity of low density polyethylene (LDPE)/carbon black (CB) during the heating/cooling recycling was studied. 研究了低密度聚乙烯(LDPE)/炭黑(CB)复合物在升温、降温循环中的导电性能。
- The graft copolymerization of acrylic acid (AA) onto low density polyethylene(LDPE) with benzoyle peroxide (BPO) as initiator in anhydrous xylene was studied. 在二甲苯溶液中以过氧化苯甲酰为引发剂研究了丙烯酸在聚乙烯上的接枝共聚。
- The grafting of acrylic acid on to low density polyethylene(LDPE) was studied in solution. Benzoyl peroxide(BPO) and xylene were used as initiator and solvent respectively. 以过氧化苯甲酰(BPO)为引发剂,二甲苯为溶剂,进行了丙烯酸与低密度聚乙烯(LDPE)的溶液接枝聚合。
- The melt grafting of maleic anhydride (MAH) onto linear low density polyethylene(LLDPE) was initiated by dicumyl peroxide(DCP) in a twin screw extruder. 以过氧化二异丙苯(DCP)为引发剂,在双螺杆挤出机中进行了马来酸酐(MAH)熔融接枝线性低密度聚乙烯(LLDPE)的研究,用红外光谱表征了接枝反应的存在。
- It is used f o r blowing the various plastic film of low density polyethylene(LDPE), high density polyethylene(HDPE) a n d linear low density polyethylene(LLDPE) etc. 用于吹制各种低密度聚乙烯(LDPE)、高密度聚乙烯(HDPE)和线性低密度聚乙烯(LLDPE)等塑料薄膜。
- The extrudate swell behaviour of linear low density polyethylene and low density polyethylene blend (LLDPE/LDPE) melt is studied by means of a capillary rheometer. 应用毛细管流变仪,考察了实验条件下线性低密度聚乙烯与低密度聚乙烯共混物(LLD-PE/LDPE)熔体挤出胀大行为及其影响因素。
- In this study,the blends of methylvinylsilicon rubber(VMQ) and linear low density polyethylene(LLDPE) thermoplastic elastomer have been prepared by dynamical vulcanization. 采用动态硫化法制备了甲基乙烯基硅橡胶(VMQ)/线形低密度聚乙烯(LLDPE)热塑性弹性体。
- Colored LDPE Regrind, Colored LDPE Regrind shall consist of shall consist of sorted reground flake of Low Density Polyethylene (LDPE), sorted into a single color. 有颜色的LDPE再生(料)将包括将包括低密度聚乙烯被分类的被再生(料)(LDPE),被排序入一种唯一颜色。
- The rheological properties of low density polyethylene (LDPE) were measured under conditions close to the practical extrusion process by means of a capillary rheometer. 应用毛细管流变仪测量了在接近实际挤出工艺条件下低密度聚乙烯熔体的流变性质;
- It is used for blowing the various plastic film of low density polyethylene(LDPE), high density polyethylene(HDPE) and linear low density polyethylene(LLDPE) etc. 详细内容:用于吹制各种低密度聚乙烯(LDPE)、高密度聚乙烯(HDPE)和线性低密度聚乙烯(LLDPE)等塑料薄膜。