您要查找的是不是：
- The results indicate that the Hamiltonian systemis applicable to the mechanics analysis in piezoelectric materials. 表明哈密顿体系适用于压电材料的力学分析。
- Mechanics analysis of cylinder upsetting between flat platen and supporting ring was conducted. 摘要对水压机锻造平板、漏盘间镦粗圆柱体进行了力学分析。
- A good mechanics analysis approach was presented for reliability analysis and damage tolerance design of aerofoil ... 为机翼结构的可靠性分析和损伤容限设计提供了比较有价值的力学分析手段。
- It founds an analysis model and then does the mechanics analysis while doing the design calculation of the cross-axle. 建立了十字轴设计计算时的力学模型,并进行了力学分析;
- Mechanical analysis of flexible casing hinge connection. 柔性套管铰链接头力学分析。
- This paper introduces the mechanics analysis, calculation and construction technique of the reinforcement of bridge structures with CFRP. 本文对CFRP加固桥梁结构进行了受力分析和设计计算,并介绍了其施工工艺。
- Based on practices of some mines,the method of rock mechanics analysis suitable for design of structural parameters of stope is introduced. 提出了适用于矿山开采设计采场结构尺寸岩石力学分析方法,并通过相关矿山实例加以论述。
- The consistence of the results from two ways improves that finite element method is suitable for the mechanics analysis of th... 两种分析方法所得结果基本一致,从而证明了采用有限元方法可以对深海采矿输送软管进行力学分析。
- Having completed calculation of top drive counter-torque and mast mechanics analysis,an upgrading proposal has been put forward. 完成了安装顶驱后反扭矩的计算和井架力学分析,并提出了井架结构的改造方案。
- Considering small annular clearance and large hole curvature in slim hole, the nonlinear mechanics analysis of BHA is carried out by gap-element method. 针对小井眼水平井环空间隙小、曲率大的特点,应用间隙元法对下部钻具组合进行了非线性静力学分析;
- Abstract In this paper,the mechanics analysis for the traditional 3-D hydraulic fracturing in-situ stress measurment method is done,and a new theoretical model proposed. 摘 要 本文对现有的水压致裂三维地应力测量方法进行了深入的力学分析，在此基础上提出了新的理论模型。
- Working Mechanism Analysis of Several Kinds of Gas Cleaning Devices. 几种烟气净化装置的工作机理分析。
- This subject introduce some common rectangle ore pillars and its advantages,and rock mechanics analysis and evaluation of rectangle ore pillars support effects. 介绍了几种常见矩形矿柱及其优点,并对矩形矿柱的支撑效果进行岩石力学分析和评价。
- It is approved that construction mechanics calculational accuracy is sufficient for practical application by simple and convenient mechanics analysis method. 用常规设计的简化计算方法进行该工法的施工力学分析计算是可行的。
- Experiment has been performed to investigate the wet skid and rolling loss of nine vulcanized rubbers by using Dynamic Mechanics Analysis(DMA) technique. 利用动态力学分析技术,研究了9种胶料的湿抓着性及滚动阻力。
- The supporting type choosing, the mechanics analysis of support structure and the study on stability of deep foundation pit are important problems in geotechnique field. 深基坑的支护方式选择、支护结构受力分析与基坑稳定性研究成为岩土工程领域的重要课题。
- The Mechanism Analysis of Control Valve Cavitation and the Measures to Avoid It. 控制阀气蚀机理分析及防止措施研究。
- Mechanism analysis on the formation damage by retention of particles suspended in injection water. 注入水中固相颗粒损害地层机理分析。
- Fracture mechanical analysis of riser nodes of offshore platform at low temperature. 低温环境下海洋平台管节点的断裂力学分析。
- The results of mechanical analysis showed that the aminating treatment has little effect on the strength of CFs. 力学数据表明氨化处理不会影响碳纤维强度。
