您要查找的是不是:
- The melt index (MI) ofpolypropylene (PP) has significant effects on the impregnation and interface forming process in GMT making. 聚丙烯的熔融指数对GMT的浸渍过程及界面形成过程有着重要的影响。
- Our discussion was centred on the efficiency of fire-resistant, the impact strength and melting index of fire-resistant ABS as a function of PVC, CPE, Sb2O3 and etc. 着重讨论了聚氯乙烯、氯化聚乙烯以及助阻燃剂三氧化二锑等的用量对阻燃ABS树脂的阻燃效果,以及综合物理机械性能的影响。
- The application results on real industrial process show that AKPLS can predict the polypropylene melt index more accurately than PLS and KPLS. 工业数据应用结果表明,所提出的AKPLS方法能够比PLS、KPLS方法更准确地预报聚丙烯熔融指数的变化。
- With PP chips and antibacterial matrices blent,the antibacterial special raw material with high melt index is prepared for speed spinning. 采用聚丙烯切片、抗菌母粒共混,制成高熔融指数的抗菌高速纺专用料进行纺丝。
- Influence of inorganic pigments on toner morpology and relations of toner composition with glass transition temperature,soften temperature and melt index were investigated. 考察了无机颜料对墨粉颗粒形貌的影响; 墨粉的玻璃化转变温度、软化点、熔融指数与墨粉组成的关系;
- The influences of substrates, melt index (MI) and VAC content in EVA, selection and add-on of peeling force stabilizers on the properties of projective f ilm products are studied. 研究了基材、EVA中熔融指数和醋酸乙烯含最、剥离力稳定剂的选择及用量对保护膜产品性能的影响。
- The effects of various parameters, such as monomer (MAH) , initiator(DCP) concentration and process condition on grafting percentage and melt index (MFR) wen-studied . 考察了单体、引发剂用量和加工条件对接枝率及熔体流动速率的影响。
- By blending Plastic grade PP chips and far-infrared matrices, the far-infrared special raw material with high melt index was prepared for high speed spinning. 采用塑料级聚丙烯切片与远红外母粒共混改性造粒,制咸高熔融指数的远红外高速纺专用料进行纺丝。
- The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt. 结果表明:合成过程中少量己内酰胺的加入,在不明显降低接枝物接枝率的情况下可以明显改善接枝物的熔体粘度,提高了接枝物的流动性能。
- Effects of two components' melt index, spinning temperature, lateral blowing, drawing ratio, crimping and heat setting on fiber quality and properties are discussed. 讨论了两种切片的熔融指数、纺丝温度、侧吹风、后拉伸倍数、卷曲、松弛定型工艺对产品质量及性能的影响。
- The results showed that the properties of the raw material such as the size, melting index (MI) and reaction temperature, cl content are important factors to effect the dissolvability of the CIPP. 结果表明,选择适当的控温方式制得氯分布均匀的CIPP溶解性较好;原料熔融指数高的等规聚丙烯原料制得的CIPP产品溶解性较好;
- Compared with CMMS method,the primary catalyst dosage can be reduced from 78 g to 53 g per reactor,the polypropylene products with melt index 0.2~0.3 g/10 min are produced easily by control of no hydrogen addition. 与甲基环已基二甲氧基硅烷(CMMS)生产低熔指聚丙烯相比;单釜主催化剂用量由78 g降至53g;并在绝氢状况下熔融指数更易控制在0.;2-0
- It was found that different n(-NCO)/n(-OH) ratios and different diisocyanate structures have a great effect on the melt index, the microphase morphology structure and physical property of TPUE. 结果表明,n(-NCO)/n(-OH)和异氰酸酯结构对热塑性聚氨酯弹性体的熔融指数、微相形态结构和物理机械性能有较大的影响。
- The sea seemed to melt into the sky at the horizon. 在水平线处,海洋似渐渐没入天际。
- Snowflakes are melting as they reached the ground. 雪花触地便融化了。
- Being heated, the metal is rapidly melting. 由于受热,金属在迅速熔化。
- Production of Polypropylene with Low Melt Index 低熔融指数聚丙烯的开发生产
- All his support melt away when he really needed it. 在他真正需要支持时,却得不到一丝半点。
- At high pressure dry ice will melt. 高压下干冰会溶化。