您要查找的是不是：
- Current Applications of Metal Clad Plate 浅析金属层压复合材料的应用现状
- Standard Specification for Reactive and Refractory Metal Clad Plate 活性和难溶金属复合板标准规范
- Current Development Condition of Process of Metal Clad Plate 金属复合板生产方法的发展现状
- metal clad plate 金属铠装板
- The auxiliary buses are normally composed of metal clad switchgear. 厂用母线由铠装开关装置组成。
- metal clad plates 金属复合板
- The ARB technique not only increased greatly the bonding strength of TA1/Q235 clad plate,but also thinned the microstructure of Q235 plate. 结果表明采用累积叠轧焊方法不仅可以大幅度地提高TA1/Q235的结合强度,而且还可以获得连续均匀、组织细化的Q235的结合组织。
- Clad plate,which is made of titanium/steel, is tore in the edge of the plate during the process of explosives welding. 钛/钢复合板在爆炸焊接工艺中四周边角被撕裂现象严重,是爆炸焊接钛/钢复合板的难点之一。
- The characteristics and status quo on domestic and foreign metal clad sheet were briefly enumerated. 简要列举了复合钢板的主要特性以及国内外复合钢板的现状。
- Welding material selction of clad plate refers to those of the same clad material respectively. 复层焊接材料挑选参考异类复层材料焊接时选用的焊接材料。
- When explosive welding the big and thick stainless steel clad plate, there are some quality defects of small area melding in interface appeared random. 摘要爆炸焊接中厚不锈钢复合板时，板面容易随机产生小面积的界面熔化缺陷。
- The practice proved that the welding quality of stainless steel clad plate was very steady if following the welding points. 实践证明,只要遵循其焊接要点,不锈钢复合钢板的焊接质量是非常稳定的。
- Similarly, the cantilevered canopies of metal clad steel structure and fritted pattern glass merge the wave forms into a series of repeating flowing elements. 悬臂式天蓬采用金属复合钢结构，结合带烧结图案的玻璃，使整栋建筑的波浪形态融汇成一组流动不息的动感元素。
- This piece of handicraft has metal cladding on its surface. 这件工艺品的表面有金属镀层。
- The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence. 对不锈钢复合钢板的焊接特点进行了理论分析,总结出其焊接三要素:焊接坡口、焊接材料和参数、焊接顺序。
- WELDING PROCEDURE OF STAINLESS STEEL CLAD PLATE 不锈钢复合钢板的焊接工艺
- Discussion On Welding of Stainless Clad Plate 不锈钢复合钢板焊接探讨
- thick-wall stainless steel clad plate 厚壁不锈钢复合板
- One of main reason for producing SCC in cladding plate weldments is the role of tensile residual stresses. 复板焊接结构出现应力腐蚀开裂的主要原因之一是拉伸残余应力的作用。
- A metal plate used for casting typefaces. 金属版浇铸铅字字面的金属版
