您要查找的是不是:
- ACR is a copolymer of methyl methacrylate with acrylate. ACR是一种甲基丙烯酸甲酯与丙烯酸酯类的共聚物。
- In benzene or ethyl acetate solution rates increase linearly with methyl methacrylate concentration. 在苯或乙酸乙酯溶液中其衰减速度随甲基丙烯酸甲脂浓度呈直线地增大。
- With methyl methacrylate the particle diameter increases linearly with conversion indicating particle aggregation. 采用甲基丙烯酸甲酯时,粒子直径随转化率呈直线增大,这就表明粒子发生了聚集。
- AgCl//PMMA organic-inorganic hybrid membrane was prepared by reverse microemulsion polymerization using methyl methacrylate(MMA) as oil phase. 以甲基丙烯酸甲酯(MMA)为油相,利用微乳液聚合技术制备了氯化银/聚甲基丙烯酸甲酯(PMMA)有机-无机杂化膜。
- The kinetics of graft copolymerization of SBS and methyl methacrylate in toluene initiated by BPO was investigated. 以过氧化苯甲酰(BPO)为引发剂,甲苯为溶剂,膨胀计法研究甲基丙烯酸甲酯与SBS接枝聚合反应动力学。
- We studied the dosage of methyl methacrylate (MMA) and density effect on the mechanics proper of CE/PMMA-IPN. 研究了甲基丙烯酸甲酯(MMA)的含量对CE/PMM-IPN体系的力学性能及密度的影响。
- Kinetics of methyl methacrylate (MMA) bulk polymerization is investigated in this paper. 摘要对甲基丙烯酸甲酯(MMA)本体聚合动力学进行了研究。
- Complex 1 could catalyze the polymerization of methyl methacrylate and acrylonitrile. 配合物 1 能够催化甲基丙烯酸甲酯和丙烯腈的聚合。
- Poly(methyl methacrylate) branched chain in MG molecule structure was destroyed when thermal and oxygenous aging. MG分子结构上的显著变化是聚甲基丙烯酸甲酯支链破坏,热稳定性取决于接枝物结构及其热性能。
- This paper, introduces a new redox initiation system( BPO-DHPT) which makes methyl methacrylate resin cure effectively at room tempera-ture. 我们发现一种新的BPO-DHPT氧化-还原引发体系能很好地引发其室温聚合,研究了其引发机理。
- The pigment printing binder of textile for environmental protection was prepared by copolymerization with butyl acrylate, methyl methacrylate and styreneis as the main materials. 摘要以苯乙烯、甲基丙烯酸甲酯和丙烯酸丁酯为主要原料,经乳液聚合,制成了环保型的涂料印花粘合剂。
- From methyl methacrylate through performance monomers and molding compounds to sheet products, we also hold leading positions in the Americas. 从甲基丙烯酸甲酯到功能性单体、模塑化合物和板材产品,我们在美洲市场也占据了领先地位。
- A series of UV-cured AB crosslinked polymers (ABCP) based on vinyl-terminated polyethylene adipate polyurethane and methyl methacrylate were prepared. 用紫外光聚合方法制备出一系列端乙烯基聚己二酸乙二醇酯聚氨酯(PEAPU)和甲基丙烯酸甲酯(MMA)AB交联聚合物(ABCP)。
- A series of cyanate ester/Polymer methyl methacrylate(CE/PMMA) interpenetrating polymer networks(IPN) was propared by the method of synchronism. 用同步法合成一系列氰酸酯/聚甲基丙烯酸甲酯(CE/PMMA)体系的互穿聚合物网络(IPN)。
- Solidtop solid surfaces are an advanced composite of aluminum-tri-hydrate and methyl methacrylate (MMA) developed as a practical material for living. 秀丽台实体面材是一种先进的高分子复合材料,主要成分是甲基丙烯酸甲酯(MMA)和氢氧化铝填充物。
- A series of cyanate ester/Polymer methyl methacrylate (CE/PMMA) interpenetrating polymer networks (IPN) was propared by the method of synchronism. 用同步法合成一系列氰酸酯/聚甲基丙烯酸甲酯(CE/PMMA)体系的互穿聚合物网络(IPN)。
- Isotactic poly(methyl methacrylate)(it-PMMA) is usually prepared by anionic initiators such as alkyllithium and Grignard reagents in organic solutions. 全同立构聚甲基丙烯酸甲酯通常使用阴离子活性聚合方法制备,引发剂为烷基锂、格利雅试剂等,反应在有机溶剂中进行。
- Methyl methacrylate (MMA)-styrene (ST) copolymers were synthesized by a suspension copolymerization with the different molecular weight. 摘要采用悬浮聚合法合成了两种不同分子量的甲基丙烯酸甲酯(MMA)-苯乙烯(ST)共聚物。
- The pyrolyzed behavior of tetrabasic copolymer (2-butene,methyl methacrylate, butyl acrylate, octyl acrylate) at various temperature was investigated. 报道了2丁烯、甲基丙烯酸甲酯、丙烯酸丁酯、丙烯酸辛酯四元共聚物在不同裂解温度下的热裂解行为。
- Objective:To prepare poly methyl methacrylate(PMMA) filled with organic montmorillonite(MMT) and observe the friction-wear properties. 目的:制备聚甲基丙烯酸甲酯(PMMA)/纳米蒙脱土(MMT)复合义齿基托材料并进行摩擦磨损实验。