您要查找的是不是：
- micro - tensile bond strength 微拉仲黏结强度
- Keywords orthodontics;temperature;humidity;orthodontic brackets;bond strength;shear bond strength;tensile bond strength; 关键词正畸;温度;湿度;托槽;粘接强度;抗剪切强度;抗拉强度;
- Tensile bond strength 黏结抗张强度
- micro- tensile bond strength 微拉伸黏结强度
- The effect of the MMT content on the bond strength was studied by testing the tensile strength of sanding core. 通过砂芯抗拉强度的测定，研究了MMT的用量等因素对粘结强度的影响；
- Objective To study the tensile and shear bond strength of resin-reinforced glass ionomer cement(RGIC) on orthodontic brackets. 目的探讨两种树脂加强型玻璃离子水门汀对托槽粘结强度的影响。
- Effects of bonding manner and process controlling on dispersity of tensile bonding strength 工艺条件对拉伸试件粘接强度分散性的影响
- Bond strength is an important parameter for wafer bond. 键合强度是关系到键合好坏的一个重要参数。
- The bond strength experiment of dogtooth exposed to pulsed Nd: YAG laser[J]. 引用该论文 朱建中;黄炜;许肖杰;林斌;陈钰清;顾锡荣.
- Xeno III Adhesive provides bond strength comparable to total etch systems. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
- The effects of particle volume fraction, tensile rate and interface bonding strength on the properties of GB/HDPE composites were studied by tensile test and SEM observation. 通过GB／HDPE的拉伸实验和断口形貌分析，研究了颗粒体积分数、拉伸速率、界面强度对GB／HDPE复合材料力学性能的影响。
- Bond strength between tooth and base bracket with two bracket base designs: An in vitro comparative study. 两种底板托槽体外粘结强度的对比研究。
- The shear bond strength of titanium and its alloys with SOLIDEX veneering resin. 钛钛合金牙粘结复合树脂。
- The bonding strength between the substrate and the coating,the bending,the compressing,tensile strength and elastic modulus of the coating were also determined. 结果表明,稀土能够提高涂层与基体的结合强度、抗弯及抗拉强度,但降低了涂层的抗压强度。
- The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS. 利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。
- It can be concluded that the bond strength of Tyrian/One-Step Plus has a comparable high value under microtensile test. Tyrian/One-StepPlus黏结系统的黏结性能最好。
- Insulating ability and peel bond strength are two important properties for thermal insulating covering. 保温性能和剥离强力是保温被两个非常重要的性能指标。
- Bond strength you can test up to through the use of the avulsing test, or test a consistent reference samples. 粘合强度可以通过采用测试盘进行剥离测试，或测试某个质量稳定的参考样本。
