您要查找的是不是：
- microalloy carbonitride 微合金碳氮化物
- STRAIN INDUCED PRECIPITATION OF MICROALLOY CARBONITRIDE IN MICROALLOYED BAINITIC ENGINEERING STEEL 贝氏体型非调质钢微合金碳氮化物的应变诱导析出
- Keywords non quenched and normalized bainitic steel microstructure properties microalloying carbonitride precipitation phase; 贝氏体非调质钢;组织;性能;微合金析出相;
- New microalloy non-quenched-tempered steel was studied. 研制了一种新型微合金非调质钢。
- Electropulsing was employed to treat a low carbon microalloy steel. 研究了脉冲电流对一种低碳微合金钢的组织和力学性能的影响。
- It is feasible and resultful to use the new microalloy non-quenched-t... 将研制的新型微合金非调质钢用于拖拉机的牵引插销是可行且有效的。
- Abstract: A new type non-quenched-tempered microalloy steel has been developed. 摘 要 ：研制了一种新型微合金非调质钢。
- They include niobium and vanadium micro-alloying technology,microalloy slab quality ... 提出了实施精品生产战略的技术措施。
- The V-N microalloy steel with yield strength of 550 MPa is produced by EAF-CSP route. 目前,在EAF-CSP流程中通过V-N微合金化技术可成功生产屈服强度为550 MPa的高强度低合金钢。
- Simply by adding an additional gas such as acetylene (C2H2), you can create chromium carbonitride. 简单地加入另外的气体例如乙炔，就能形成铬的碳氮化合物。
- The effect of technical parameters on nitrogen content in vanadium carbonitride is investigated. 研究了一步法合成碳氮化钒的生产工艺及工艺参数对碳氮化钒氮含量的影响。
- The paper gives further discussion about the design of the microalloy composition and heat-treatment process. 对解把刀的微合金化设计及热处理工艺设计进行了深入的分析探讨。
- CARBONITRIDE ENTIRE PART TO .015/ .025EFFECTIVE CASE DEPTH - SLOW COOL. LABCERTIFY CASE DEPTH. 整个碳氮的有效部分的深度为0.;015/0
- The paper introduced the optimization of chemical composition of rare earth microalloy. 对玻璃模具材质的化学成分进行了合理设计和优选。
- Isothermal aging in the bainite phase, the microalloy elements have two effects:1. 在合金钢之变韧铁变态研究中发现，合金碳化物会扮演著下列两种角色：1.;在高温沃斯田铁区域内所产生之合金碳化物有助于碳原子之分配排放，因此可以促进变韧铁相变态之进一步分解，并减少块状沃斯田铁之存在。
- First-principles studiesof the effects of microalloy elements on Fe/Al interface[J]. 引用该论文 赵磊;孙勇;李玉阁;孟秀凤;宋群玲.
- The effect of microalloy element on the microstructure and mechanical properties of high-speed wheel steel was studied. 摘要研究了微量铬对高速车轮钢组织和性能的影响。
- The influence of deposition parameters on chemical structure and optical properties of silicon carbonitride film[J]. 引用该论文 朴勇;梁宏军;高鹏;丁万昱;陆文琪;马腾才;徐军.
- This paper carries out controlled rolling and controlled cooling test by means of adding microalloy element V to Q345D steel. 本文通过对Q345D钢加入微量合金元素V并进行控轧控冷试验。
- The central part of the ring structure may be either carbide with a high W content or carbonitride with a high Ti content. 环状结构心部可以是以钨等重金属元素为主要成分的碳化物， 也可以是以钛为主要成分的碳化物和碳氮化物。
