该词条未找到_海词词典

您要查找的是不是：

The microstructure evolutions during spray forming process for high magnesium aluminum alloy are investigated in this paper. 研究了高镁铝合金在喷射成形过程中显微组织的变化。
The microstructure evolutions of Al-Si-bearing low carbon steel during multi-pass hot deformation and subsequent continuous cooling process were studied. 利用热模拟试验研究了铝硅合金化低碳钢多道次变形及连续冷却过程的组织演变。
The phase transformation and the microstructure evolution process within ASB in TC16 alloy were explained. 讨论了TC16中绝热剪切带内的相变规律和微观结构演化过程。
The microstructure evolution of the polycrystalline solids is a complex procedure, which is a function of many factors. 多晶固体材料显微结构的演化与诸多因素密切相关,是一复杂的过程。
The rules both in transformation temperature and in microstructure evolution of IF steel are deplored. 并比较分析薄板坯连铸连轧工艺下无间隙原子钢在变形及不变形条件下的相变温度及组织演变规律。
The microstructure evolution of the polycrystalline solids is a complex procedure,which is a function of many factors. 多晶固体材料的显微结构的演化与诸多因素密切相关，是一复杂的过程。
Primary carbide microstructure evolution in the semi-solid hypereutectic high Cr cast iron has been studied at partial remelting temperature. 研究了半固态过共晶高铬铸铁坯料部分重熔保温过程中初生碳化物的演变规律。
We get the conclusion that the microstructure evolution of electrolytic copper powder and atomizing copper powder was different in SPS process. 得到电解铜粉和雾化铜粉在SPS烧结过程中显微组织演变特徵和规律不同的结论。
The multi-mechanism and mathematic models of microstructure evolution during material hot forging were emphatically de-scribed. 重点介绍了金属热锻过程中材料微观组织演变的机理和数学模型。
Therefore, the extrusion forming can be guided by the microstructure evolution law of the materials, such as the dislocation evolution of the ECAP. 因此，考虑等径角挤压过程中的位错演化等材料微观组织演化规律，对材料的实际挤压成形有指导作用。
With increasing temperature the microstructure evolution process completes earlier and the subgrain size of the deformed material increases. 温度升高，显微组织的演化过程缩短，变形材料的亚晶尺寸增大。
Microstructure evolution of shear bands originated from high strain,high strain rate deformation in electromagnetic pure iron DT4 had been examined. 结果表明:在压痕周围形成离散的剪切带,形变引起了块状非晶合金局部自由体积增加。
The quenched 45 steel samples were jointed by linear friction welding.The microstructure evolution, microhardness and tensile properties of the joint were investigated. 摘要对淬火状态下的45钢进行了线性摩擦焊接试验，分析了焊接头的组织变化特点，并对接头的拉伸性能和显微硬度进行了测试。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging. 有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
Cu-10Ag and Cu-10Ag-Ce alloys in situ filamentary composites were prepared. The relationships of the ultimate tensile strengths(UTS) and microstructure evolution of the filamentary composites were studied. 制备Cu-10Ag和Cu-10Ag-Ce合金原位纤维复合材料,研究结构变化与应变强化的关系。
The hot deformation behaviors and microstructure evolution of 6Cr21Mn10MoVNbN steel were systematically analyzed by thermomechanical compression test and hot rolling solid solution test, and the best technical parameters were obtained. 通过热模拟压缩试验和热轧固溶试验系统分析了6Cr21Mn10MoVNbN钢的热变形行为和显微组织演变规律,获得了最佳的工艺参数。
The microstructure evolution of AZ91D magnesium alloy semisolid slurry in the SIMA process was investigated,and the influencing factors on spherical microstructure evolution were analyzed. 研究了大体积AZ91D镁合金在SIMA法制备半固态浆料过程中组织的演变规律;并对半固态组织球状化演变的影响因素进行了分析.
The microstructure evolution of the composites was investigated using scanning electron microscopy(SEM) and distribution of Fe and Ag in the matrix was analyzed by EDS equipped on SEM. 采用扫描电镜(SEM)观察了材料的微观组织演变和拉伸断口形貌,用能谱仪(EDS)分析了Fe和Ag在Cu基体中的分布。
By synchrotron X-ray diffraction (XRD) and Rutherford back scattering(RBS),the microstructure evolution of oxidized Ni/Au contact to p-GaN annealed at different temperature in air are investigated. 用卢瑟福背散射(RBS)和同步辐射X射线衍射(XRD)研究了p-GaN上的Ni/Au电极在空气下不同温度合金后的微结构的演化;并揭示这种接触结构的欧姆接触形成机制.
In this paper two advanced kinetic models of binary alloy ordering reaction was introduced as well as the development of computer simulation for the microstructure evolution of this kind alloy. 介绍了两个先进的二元合金有序化反应动力学模型、以及利用计算机对此类合金组织演化模拟取得的进展。