您要查找的是不是:
- Preparation and Performance of High-Temperature Oxidation Resistant of Coatings for Mild Carbon Alloyed Steel 低碳合金钢高温防氧化涂料的制备与性能
- mild carbon alloyed steel 低碳合金钢
- The intermedium temperature microstructure of medium carbon alloy steel is upper and lower bainite. 中碳合金钢的中温转变组织只有上、下贝氏体。
- The influence of alloys on the seawater corrosive and abusive resistance of medium carbon alloy steel has been studied. 本文主要研究了合金元素对中碳合金钢的耐海水腐蚀磨损的影响规律。
- As a result, it provides basis for studying phase transformation from pearlite to austenite in low carbon alloy steel after high pressure treatment. 所得结果为研究低碳合金钢经高压处理后组织中珠光体向奥氏体转变提供一定的参考数据。
- We are specialized in producing and processing fasteners, special parts, rivet nuts and rollers of low carbon and mid carbon alloy steel in accordance with ANSI, DIN, JIS, etc. 专业生产及加工低碳,中碳,中低碳合金钢紧固件,异型件,拉母,罗拉,美,德,日制等螺母。
- The microstructure and the property of two low carbon alloy steel forged parts were compared for parts after isothermal normalizing with those after ordinary normalizing. 研究了两种合金渗碳钢锻件普通正火和等温正火的显微组织和性能。
- Under 2.7J impact work, the abrasion of medium carbon alloys are deep flaking while that of low carbon high alloy steels are shallow flaking and the mass wear is lower. 2.;7J冲击功下,中碳合金钢以深层剥落为主,低碳高合金钢以浅层剥落为主,磨损失重小;
- The evolution of deformation dislocation structure during the tensile loading was examined by transmission electron microscopy in the tempered martensite of low and middle carbon alloy steels. 应用透射电子显微术研究低碳及中碳合金钢回火马氏体的形变位错结构随拉伸加载过程的演变。
- The martensite in low and medium carbon alloy steels mainly is lath martensite of dislocation substructure besides little twin substructure at the segregation regions of chemical composition. 低、中碳合金钢中的马氏体除局部区域因成分偏析呈孪晶亚结构外,主要是位错亚结构的板条马氏体。低碳合金钢的中温转变组织主要有兰类,即粒状组织、上贝氏体和下贝氏体。
- The accelerated corrosion properties of high strength weathering steel Q450NQR1 are studied and compared with mild carbon steel Q345qD by means of the periodical immersion cyclic corrosion test,and the phase constitution of rust layers is analyzed by XRD. 通过周期浸润模拟加速腐蚀试验,对比研究了高强耐大气腐蚀钢Q450NQR1和普碳钢Q345qD的加速腐蚀性能,并用XRD对锈层的相组成进行了分析。
- Dynamic Fracture Toughness of Low Carbon Alloy Steel and Welding Joint 低碳合金钢及焊接接头断裂韧度的温度效应
- Welding procedures for carbon alloy and high strength dilute alloy steel 碳素结构钢及低合金高强钢焊接方法选择
- Research on the Corrosive-Abrasive Resistance of Medium Carbon Alloy Steel 中碳耐腐蚀磨损合金钢的研究
- The dynamics of intragranular nucleation of ferrite in the low carbon VN alloyed steel under the compact strip production (CSP) is a new research field. 在CSP(Compact Strip Production)工艺条件下低碳钢中铁素体的晶内异质形核动力学是一个新的研究领域。
- The supply of alloy steel is very tight at present. 合金钢的供应目前很紧张。
- The connecting rod is made from forged alloy steel. 连杆由锻造的合金钢制成。
- Suitable for welding low carbon steel, low alloy steel structure. 适用于各种低碳钢、低合金钢构件的焊接。
- CFR uses low carbon, medium alloy steel as the matrix. CFR合金采用低碳、中合金钢成分为基体。
- Welding of importand low alloy steel structures. 用于焊接重要的低合金钢结构。