您要查找的是不是：
- mild steel flat bar 软钢扁棒材
- black mild steel flat head rivet 黑铁扁头铆钉
- bright and black mild steel flat head tinmen rivet 号头铆钉
- black mild steel flat head tinmen rivet 黑铁号头铆钉
- Tool-Resisting Steel Flat Bars and Shapes for Security Applications 安全设备用不易加工的扁钢棒和型材
- BLACK MILD STEEL HEXAGON BOLTS WITH NUTS B.S. 英制六角螺闩。
- Mold base can be of mild steel or aluminum. 模座可以用一般的钢材或者铝。
- The pass design and application in compound straightening of flat bar of alloy steel are stated. 主要叙述了合金钢扁钢复合矫直孔型的设计与应用。
- Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications 安全设备用不易加工的扁钢棒和型材规范
- The carbon content of mild steel is much lower than cast-steel. 软钢的含碳量要比铸钢的低得多。
- Mild steel is usually used for general engineering purposes. 软钢通常用在一般工程上。
- Galvanized steel pipe, ERW black pipe, square and rectangular hollow section, galvanized strip, square bar, flat bar, angle bar, hot rolled strip, cold rolled strip, steel plate. 产品名称:镀锌管、黑管、方矩形管、热轧钢带、冷轧钢带、镀锌带、放钢、扁钢、角钢。
- The load bearing flat steel bar and banding steel flat have high strength only when vertical to the steel grating, so unreasonable pressure in other directions may lead to deformation or damage. 钢格板承载扁钢及包边扁钢仅在钢格板高度上方（垂直于钢格板平面方向）有较高的强度，侧向不合理受力会导致变形或损坏。
- High Sn concentration (all Pb-free alloys) is capable of dissolving mild steel. 较高的锡浓度(所有无铅合金)能够溶解低碳钢。
- Mild steel has a high tensile strength, this being 200 times that of concrete. 低碳钢具有很高的抗拉强度，大约是混凝土的抗拉强度的200倍。
- If the carbon content of the steel is below 0.2 per cent, the product is mild steel, which is quite ductile. 钢的含碳如低于1.;2%25就是延展性好的软钢。
- Mild steel has a high tensile strength, this being about 200 times that of concrete. 软钢的抗张强度大，约为混凝土的200倍。
- In this paper,early stage fracture and cutting edge break of dies of washer whizzer motor Silicon steel flat are analysed by means of multiple measurement methods. 对洗衣机脱水电机矽钢片冲模的早期断裂与崩刃,运用多种测试手段进行失效分析。
- Combination ring sensors for corrosion monitoring on mild steel and copper specimens. 用于低碳钢与铜料试样腐蚀监测的环形组合传感器。
- The sample data set is collected on JJ-I water jet machining and mild steel A3 is used as the cutting sample material. 样本数据在JJ-I水射流切割机床上实验获取,A3钢样板作为切割试件。
