您要查找的是不是:
- Model Test Study on Washing Machine Cabinet 洗衣机机箱模态试验研究
- Model testing study is made on prefabricated spiral V-notch blasting, and hydromatic method is used to simulate the quasi-static process in blasting of explosive. 因此,研究螺旋切槽裂纹的扩展以及与螺旋角等的关系,具有重要意义。
- MODEL TEST STUDY ON CONCRETE FILLED STEEL-TUBE TRUSS ARCH BRIDGE 钢管混凝土桁架拱桥模型试验研究
- MODEL TEST STUDY OF FAULT WATER PRESSURE IN ROCK SLOPE 岩石边坡中断层水压的模型实验研究
- Model test study of the stability of roadway in cracked rock mass 裂隙岩体巷道稳定性模拟研究试验
- Model Test Study of Fatigue Property of Two-ash-macadam Road Base 二灰碎石基层疲劳性能的模型试验研究
- Model Test Study on Gongtan Channel Regulation of Wujiang River 乌江龚滩航道整治试验研究
- Model test study on unsteady flow around the bridge pier 桥渡非恒定流水工模型试验研究
- A MODEL TEST STUDY OF THE RATIONAL STRUCTURE OF A LATHE BED 车床床身合理结构的模型试验研究
- An In-situ Model Test Study of Excess Pore Pressure due to Pile Driving 沉桩挤土对孔隙水压力影响的试验研究
- MODEL TEST STUDY ABOUT FINE GRAINED TAILINGS DAM OF LONGDU TAILINGS PONE 龙都尾矿库细粒尾矿堆坝模型试验研究
- MODEL TEST STUDY ON LANDSLIDE UNDER RAINFALL AND RESERVOIR WATER FLUCTUATION 雨水及库水作用下滑坡稳定模型试验研究
- The Whole Model Test Study for Jingzhou Changjiang River Highway Bridge 荆州长江公路桥整体模型试验研究
- Model Test Study of Anchor Housings for Self-Anchored Suspension Bridge 自锚式悬索桥锚箱模型试验研究
- Model test study on regulation project in Nantong section of Changjiang River 长江南通河段整治工程模型试验研究
- MODEL TESTING STUDY ON PREFABRICATED SPIRAL V-NOTCH BLASTING 螺旋切槽孔松动爆破模型试验研究
- For digital printout model test kit, request F-TK-DL. 适用于数字打印输出型号的检测组件,请参阅F-TK-DL.
- A Model Test Study on Influence of Top Karst Cave on Stability of the Surrounding Rockmass during Tunnel Construction 隧道顶部溶洞影响围岩稳定性的模型试验研究
- The results of the field survey and model test are coincide. 野外实测和模型试验的结果相互吻合.
- Centrifugal Model Test Study of Axial Bearing Behavior of Large Diameter and Very Long Single Pile 大直径超长单桩竖向承载性能离心模型试验研究