您要查找的是不是:
- Two-component modified epoxy with micaceous iron oxide pigment. 双组分改性环氧云铁中间漆。
- Two components modified epoxy with barrier pigment. Low temperature curing. 含有封闭型填料的双组分改性环氧漆。可低温固化。
- Drake R,Siebert A Recent advanees in modified epoxy Resin[J].SAMPE Ouarterly,1975.6. 陶芳牟,忻毅军.;环氧树脂的共混增韧改性研究[J]
- With the modified epoxy resin as the matrix, different fillers (Al powder AIN A1203 BeO SiC) are presented. 为提高其热导率,研究了在A组份中填充导热性较好的不同填料,如Al粉、AlN、Al_2O_3、BeO、SiC等。
- Adipic acid modified epoxy acrylate pigment wetting and dispersing agent is synthesized. 合成了己二酸改性环氧丙烯酸酯颜料润湿分散剂;
- A new type of modified epoxy resin was obtained by modifing bisphenol A epoxy resin using organic silicon. 用氨基硅油和双酚A型环氧树脂为原料合成一种新型的环氧树脂。
- The thermal and mechanical properties of the modified epoxy encapsulant were introduced. 并对改性后封装料的结构、热性能和机械性能作了详细介绍。
- The title modified epoxy abrasion resistant coatings is a erosion resistant coatings on metals. 改性环氧耐磨涂层是一种抗冲蚀磨损的金属基涂层。
- This paper reviews the application of modified epoxy resin in anticorrosion coatings and the trend of high performance. 综述了改性环氧树脂在防腐涂料中的应用及高性能化的方向。
- Especially when the mole proportion of BPF/ (BPF+BPA) is 40%, viscosity of the co-condensation modified epoxy resin is 3. 2Pa. 在共聚改性中,以BPF/(BPF+BPA)的摩尔配比为40%25时最佳,此时,其共聚树脂25℃时粘度为3.;2Pa
- The results showed that the shrinkage of system were improved obviously by adding modified epoxy acrylic ester,and the diluent had effect on shrinkage. 实验结果表明:改性环氧丙烯酸酯可以明显改善体系收缩率,稀释剂对收缩率有影响。
- To compare with epoxy acrylate, the film of modified epoxy acrylate have been improved more markedly on flexibility, glossiness and adhesive force. 和未改性树脂相比,涂膜的柔韧性显著提高,光泽度增加,附着力变好。
- This study aims to synthesize cis-butenedioic anhydride modified epoxy dimethacrylate resin and evaluate their physico-mechamical properties. 为了合成顺丁烯二酸酐改性的环氧二甲基丙烯酸酯树脂及其物理机械性能。
- This paper briefly introduced the molecular structure and the properties of the modified epoxy resins with polyurethane and polyther. 本文对聚氨酯和聚醚改性环氧树脂的分子结构及性能作了简要的论述。
- The reaction mechanism was analysed by FT-IR.Then the reaction of modified epoxy resins with the etherified melamine-formaldehyde resin was conducted. 用红外光谱分析了产品的主要基团,验证了两步的反应机理,并将合成的中醚化三聚氰胺树脂与实验室自制的丙烯酸改性环氧树脂复配,考察了涂膜固化条件。
- Epoxy resin was modified by bismaleimide resin in this paper,and polyurethane foam was modified by modified epoxy resin? 用双马来酰亚胺对环氧树脂进行改性,然后用改性环氧树脂对聚氨酯泡沫塑料进行改性。
- According to the analysis of wearing curve by tests and wear topography by SEM, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed. 浆体冲蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。
- The effects of various reaction time, reaction temperature and content of amino group of polysiloxane fluid were investigated.The modified epoxy resin was analyzed by TGA. 研究了不同反应时间、不同反应温度以及不同氨基硅油含量对改性环氧树脂性能的影响,用热重法对改性树脂的耐热性进行了表征。
- The cement mortar modified by water-based epoxy resin emulsion had better mechanical properties than by hydrophilic derivative of HBS lignin modified epoxy resin. 水性环氧树脂乳液对水泥砂浆韧性的改善要好于高沸醇木质素环氧树脂亲水衍生物;
- A polyurethane modified epoxy resin adhesive was prepared by grafting reaction between epoxy resin and prepolymer of polyurethane with the bond of -N=C=O under catalysis. 聚氨酯预聚体通过催化剂与环氧树脂接枝反应合成了聚氨酯改性环氧树脂。