您要查找的是不是：
- Molding technique parameter setting differs depending on type of product. 成型周期成型工艺参数的设定须根据产品的不同设置。
- The performance characteristics of PTFE are presented as well as the molding technique for the different kinds of PTFE. 综述了聚四氟乙烯(PTFE)的性能特点以及不同的PTFE成型工艺方法。
- The injection molding technique, after-treating technique and ultrasonic welding technique of PPS products are described in detail. 重点阐述了PPS制品的注塑工艺、后处理工艺以及超声波焊接工艺。
- Heckele, M.,etal., “Hot embossing - The Molding Technique for Plastic Microstructures,” Microsystem Technologies, Vol4, pp.122 (1998). 施垂延，“微射出成形技术于微机电系统之应用与研究”，云林科技大学机械工程研究所硕士论文，1998年。
- The paper introduces the injection molding equipment, mold and molding technique for the thermotolerant engineering thermoplastic polyphenylene ether sulphone. 介绍耐高温热塑性工程塑料聚苯醚砜树脂的注射成型设备、模具和注射工艺等。
- In the light of improving injection molding technique and mold making technique, the measures for improving the quality of plastic optical elements are given. 从改进注射成型技术和模具制造技术的角度介绍了提高塑料光学零件的质量所采取的措施。
- Use exclusive manual skill and molding technique in coordination with a physiology period of each customer and detailed consultation to make perfect chest shapes. 藉由详细健康谘询配合每位顾客的生理周期，运用独家手技与塑形技术，打造量身订做的完美胸型。
- The influence of such factors as temperature, pressure on the product quality in the molding process of PEK-C was inquired, and better molding technique of PEK-C was derived. 探讨了酚酞聚芳醚酮(PEK-C)成型工艺中温度、压力等因素对制品质量的影响,并找出了最佳的成型工艺。
- The structure design and molding technique of steel/PTFE sintering part are studied according to PTFE property and combined with the practical experience. 根据聚四氟乙烯的性能特点，探讨了钢／聚四氟乙烯热压烧结件的成型工艺。
- The paper studied the weaving process,molding technique and resin treatment of the tubular fabric composite material for repairing the textile lining of a tube under non-digging out conditions. 并对管状织物、纺织内衬软管与纺织内衬钢管的基本性能进行了测试,测试结果表明产品符合美国材料和试验协会标准。
- Two molding techniques were developed, which were screw extrusion molding and froth molding. 摘要研究植物纤维类缓冲包装材料的2种成型工艺：螺杆挤压膨化成型工艺、发泡膨化成型工艺。
- Objective To optimize the extraction technology and molding techniques of Guben expellent. 摘要目的优选固本祛毒合剂的最佳提取及成型工艺。
- The mixed binder has the advantages of high stability, easy operation, high mold shell strength and cost-effectness, which is the improvement for stuccoing slurry on ceramic mold technique. 混合粘结剂的优点是稳定性好,操作方便,型壳强度高,生产成本低。涂撒混合粘结剂浆砂陶瓷型工艺是原涂敷浆砂陶瓷型工艺的改进。
- Considerable amount of work has been carried out on the development of resin transfer molding(RTM)as a viable processing alternative to autoclaving molding techniques . 树脂转移模塑工艺(RTM)产生以来,以其经济性优势开始替代热压罐的成形方法。
- Based on the slaking curve and thermo-gravimetric curve of calcium lime, the rational cold compression molding techniques of calcium carbide were given. 摘要通过分析生石灰的消化曲线和热失重曲线，提出了合理的电石成型工艺。
- Analyzed was the feasibility for production of columnar activated carbon from Datong weak caking coal and high temperature coal tar with advanced blending and molding techniques. 分析了利用大同低灰弱粘煤和高温焦油,采用先进的配比、成型等生产工艺,生产柱状活性炭的可行性;
- He is cast in his father's mold. 他长得和他父亲一模一样。
- Air Impact Molding Technique of Italian FA 意大利FA公司气冲造型技术
- variotherm injection molding technique 变模温注塑工艺
- The technique is still at the experimental stage. 这项技术正处于实验阶段。
