您要查找的是不是：
- Mold temperature is controlled by water flow in cooling channels. 模具温度可用冷却槽中水的流动来控制。
- This will reduce and equalize mold temperatures. 这样会降低和均衡模具温度。
- Maintaining the correct mold temperture becomes more important and may justify mold temperature control equipment. 保持模具有适当温度，越来越显得重要，因而配备模具的温度控制设备是完全合理的。
- Maintaining the correct mold temperature becomes more important and may justify mold temperature control equipment. 保持模具有适当温度,越来越显得重要,因而配备模具的温度控制设备是完全合理的。
- The effects of casting speed and water flowrate on mold temperature field were discussed. 还讨论了拉坯速度和冷却水流量对结晶器温度场的影响。
- The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less. 模具温度对成型过程的影响较大，熔体温度的影响相对较小。
- With this evaporative cooling approach, the mold temperature is automatically evened out. 与此蒸发冷却的方法，模具温度是自动，最终列。
- Through genetic algorithm, the injection molding parameters that affect thin-wall mould warpage,namely the mold temperature, melt temperature, filling pressure, packing pres... 按该参数进行试验,效果良好,可以有效地减小薄壳塑件翘曲变形,其试验数值与计算数值基本相符,说明所提出的方法是可行的。
- The raw materials,extrusion pressure,pressure holding time and molding temperature during extrusion moulding have great effects on the quality of products. 实验发现:挤压成型过程中原材料、挤压力、保压时间和成型温度对制品的品质影响较大。
- The results showed that the warpage decreased with the decrease of mold temperature,nozzle temperature and hold preasure. 结果表明,随着模具温度、喷嘴温度和保压压力的降低,制品的翘曲减小;
- Unstable mold temperature will damage to the forming quality,SMC\SMY can guarantee accuracy within proper mold temperature. 不稳定的模具温度会影响成型品质，SMC\\SMY能精确的控制模具在适当温度内。
- In this paper the COS process is simulated through FEM to understand the phenomena of no fusion and lug melt because of mold temperature fluctuation. 本课题通过有限元分析模拟铸焊过程,揭示了由于模温的变动导致的冷焊或过熔的规律。
- This evaporative cooling approach to mold temperature control provides an excellent general solution to the problem of achieving uniform mold temperature and precise control. 这蒸发冷却的办法，以模具温度控制提供了一个很好的一般问题的解决办法，实现统一的模具温度和精确的控制。
- Based on the numeric analysis of the model, the effects of melt temperature, injection time, mold temperature and pre-filled volume on the cell size were studied especially. 在对该数学模型进行数值分析的基础上,着重研究了熔体温度、注塑时间、模具温度、初始填充量对微泡尺寸的影响。
- This type of cooling device can decrease iron mold temperature effectively and uniformly, lengthen working life of iron mold, and also improve the working environment. 这种冷却装置可有效地降低铁型温度，铁型冷却均匀，延长使用寿命，改善丁作环境。
- The result showed that the molding temperature and pressure, carbonizing methods and heat-treatment temperature Effectsd the structure and properties of the carbon fiber paper greatly. 研究结果表明，模压工艺、碳化方法及热处理温度直接影响产品的结构和性能。
- Normally, reinforced materials require higher mold temperatures than nonreinforced materials. 通常，补强的材料需要比没有补强的材料有较高的模温。
- A great deal of investigations indicate that the material properties especially the viscosity, process parameters such as injection velocity, mold temperature, melt temperature etc. and mo... 文献显示,物料的性能尤其是粘度、加工工艺参数如注射速度、模温、熔融温度等以及模具尺寸对夹芯注射的充模过程及其制品最终的性能影响最为突出。
- He is cast in his father's mold. 他长得和他父亲一模一样。
- Above it, injector apparatus, blowing apparatus, turn device, shedder, emergency door, gas path system, mold temperature controlling distributor, water and electricity divider, etc. 其上安装有注射、吹塑二个合模装置，转位装置、脱模装置和安全门、气路系统、模温控制分配器、水、电分配器等部件。
