您要查找的是不是：
- Multi layer spray deposition technology is used to fabricate aluminum/steel bimetal,and the factor of influencing the interface of aluminum/steel is discussed. 采用多层喷射沉积技术制备铝/钢双金属板,分析了其中对双金属板界面结合产生影响的因素。
- In this psper,the principle, development and application of multi layer spray deposition in preparation of abrasion resistant materials, heat resistant materials and composites are introduced. 介绍了多层喷射沉积技术的原理,发展过程及在耐磨材料、耐热材料和复合材料等材料的制备上的应用情况。
- The results show that the multi layer spray deposited pipe blank could be processed by such technologies as extrusion spin or extrusion roll. 采用挤压+旋压或挤压+轧制致密化成型工艺可以获得高性能多层喷射沉积耐热铝合金材料。
- It is detailed that the densities, microstructures, and mechanical properties of the multi layer spray deposited Al Fe V Si pipe blank after being extruded, spun or rolled. 本文对多层喷射沉积耐热铝合金管坯经过挤压、旋压、轧制后的密度、显微结构及力学性能进行了检测和分析。
- Spray deposition is a kind of complicated process affected by many parameters. 喷射沉积过程是一个多参数共同影响的复杂过程。
- Multi layer perceptron (MLP) is a typical artificial neural network. 摘要多层感知器神经网络是典型的人工神经网络模型。
- We are interested in solid multi layer wood plates, tiles for floorings. 本信息价值5点积分,建议回复日期2007-12-02之前,还可被浏览15次
- Spray deposition process can be optimized by studying the scanning regularity of atomizer and other process parameters. 通过对雾化器往复扫描规律以及其它工艺参数的研究,可以对喷射沉积过程进行工艺优化。
- In the end, the developing direction of MMCs prepared by the use of atomized spray deposition had been summed up. 最后，总结了雾化喷射沉积法制备复合材料的发展方向。
- It can be laid as request, salt spray homogeneously, Salt spray deposition can be adjusted at random. 挂壁式喷雾系统,可任意摆放,不占用有效的试验空间。盐雾分布均匀,沉降量可自由调整。
- In KOH, the corrosion resistance of spray deposition ZA35 alloy is better than that of cast ZA35 alloy. 在KOH介质中，喷射沉积ZA35合金与铸态ZA35合金相比，自腐蚀电位变正，腐蚀电流减小，耐蚀性增。
- By means of multi layer and multi pass lap surfacing, the surfacing layer with big thickness and area can be acquired. 采用多层焊和多道搭接工艺可获得大厚度、大面积堆焊层。
- The basic characteristics of gravitation gliding structure are multi layer,multi period,small scale,multi form. 肥城矿区内重力滑动构造的基本特点是具有多层次性、多期性、小规模性和形式多样性。
- Al 5.5Cu/TiAl 3 in situ composites was produced by spray deposition, and the microstructure and interfacial structure of the materials were analyzed. 采用喷射沉积工艺制备了Al?5.;5Cu/TiAl3自生复合材料，并对该材料的微观组织及界面结构进行了研究。
- Our SMT can produce soft,hard,singlelayer,double layer and multi layer PCB board. SMT可全自动高速贴装软硬、单层、多层PCB板。
- Plate blanks of Al8Pb4Si1.5Sn1Cu alloy were made by spray deposition process, and cladding rolling of this kind of plate with Al foil was experimented. 用雾化沉积工艺方法制备了Al?8Pb?4Si?1.;5Sn?1Cu合金板坯，并与铝箔一起进行轧制复合试验。
- Radiative exchanges will be inhibited by the use of Multi Layer Insulation foils. 辐射热交换被多层绝缘薄膜所阻止。
- Spray deposition is a novel rapid solidification technique, which has been used to manufacture rapidly solidified materials with high properties. 摘要喷射沉积是一种新型的快速凝固技术，被广泛用于研究和开发高性能的快速凝固材料。
- This paper emphasizes on the newest technology adopted in EIC control system design, such as multi layer NET technology, the distribution control system, EIC integration and etc. 这里重点阐述三电系统设计中采用的多层次网络技术、分布式集散系统及EIC一体化等最新技术。
- Based upon element by element(EBE) iterative strategies,a feedback multi layer neural model is proposed for the heat conduct problem FEM analysis. 基于Element By Element(EBE)策略 ,提出了一种反馈网络和前向网络共同组成的多层神经网络以实现热传导有限元分析。
