您要查找的是不是：
- uniform cantilever beam 等截面悬臂梁,等截面外伸梁
- The structure consists basically of two cantilever beams. 这种结构基本上由两根悬臂梁组成。
- Micron-sized cantilever beams of a 304 stainless steel were fabricated by focused-ion-beam (FIB). 采用聚焦离子束溅射蚀刻加工了微米尺寸304不锈钢悬臂梁试样。
- An interpolation algorithm for Non Uniform Rational B-Spline (NURBS) curve to control redundancy error was proposed. 摘要提出了一种能有效控制冗余误差的非均匀有理B样条曲线插补算法。
- A method is proposed to approximate arbitrary curves by spline functions with parameter of non uniform path distance. 提出用非均匀自然路径距离参数的三次样条函数近似表示任意曲线。
- The piezoelectric bimorphs of cantilever beams are used to fabricate a microgripper which is used in micromanipulation system. 摘要采用双晶片型压电悬臂梁制作一种双悬臂梁结构的微夹钳，可用于微操作系统中的微夹持器。
- The mapping is the same in all the vases so that each vase model can go with 10 different textures and with different stretching (non uniform scale). 但是所有瓶子的制作过程是一样的，每个瓶子模型配合10种不同的纹理，然后进行不等比缩放。
- Force-measuring elements employ either a cantilever beam or a column arrangement. 测力元件采用悬臂梁或柱的形式。
- The large deflection problem of cantilever beams is studied by means of pseudolinear approach and the result is compared with that by algorithm of nonlinear governing equation. 利用拟线性分析方法,研究了悬臂梁的大挠度问题,并与该问题的双参数摄动算法进行了比较。
- This paper performed a flexural test of 6 full-scale continuous beams and 2 full-scale cantilever beams with development lengths of negative reinforcements in two batches. 本文完成了负弯矩钢筋分两批切断的六根足尺约束梁和两根足尺悬臂梁的弯曲破坏试验。
- Finite element design, cantilever beam withstanding load distortion situation, some graphical displays. 详细说明:有限元设计,悬臂梁承受荷载的变形情况,有图形显示。
- The dynamics of a cantilever beam attached to a rotating rigid body is reported in this paper. 摘要本文对固结在转动刚体上柔性梁的动力学问题进行了研究。
- The cross correlation analysis techniques on time domain to analysis the stimulated light curves of uniform and non uniform corona model and compares the stimulated results with the temporal property of Cygnus X 1 are employed. 利用时间域上的交叉相关分析技术对模型的模拟光变曲线进行时间分析 ;并与 Cyg X-1的观测分析结果进行比较 .
- By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure. 中文摘要植牙术后的骨整合程度，关系到手术是否成功。
- In the algorithm,non uniform meshes and three kinds of ABCs are adopted to reduce the order of the final sparse matrix equation,and compressed storage and fast iterative solver are applied to solve the sparse matrix equation. 在结构离散化过程中采用了非均匀网格剖分并且在网格截断边界上联合采用了三种吸收边界条件 ;以最大限度地压缩形成的稀疏矩阵的阶数 .;对稀疏矩阵方程采用压缩存储技术和快速迭代解法;以有效地减少所需内存和计算时间
- Dynamical characteristics of the cantilever beam were analyzed and its dynamical equation was developed by using PEA. 采用有限元分析方法研究悬臂梁的动态特性，建立其动力方程。
- The more sophisticated nonlinear model of flight dynamics,which include non uniform inflow model,nonlinear aerodynamics of fuselage,rotor flap motion and forces coupling with the motion of helicopter body,is considered in inverse simulation. 逆仿真中采用了较为复杂的非线性飞行动力学模型 ;包括非均匀入流、机身非线性气动力以及包含机身运动耦合的旋翼挥舞运动与作用力模型 .
- A cantilever beam was experimentally studied with this method and the result is consistent with theoretical result. 以悬臂梁为例进行实验研究，实验结果与理论计算结果吻合较好。
- The plastic process analyses on uniform and non uniform cylindrical upsetting were made in detail on the basis of the principle of generalized variational inequality with friction. 基于摩擦约束广义变分不等式原理,对圆柱体均匀镦粗和圆柱体非均匀镦粗等金属成形工艺问题进行详细的塑性加工工步分析。
- With hoisting method by double cantilever beam,the hoisting of large steel trusses was get success. 双悬臂梁吊装法解决了大型钢桁架高空吊装问题,且省工、省料,实践证明,该法安全、可靠,较为实
