您要查找的是不是:
- Normal Mode Rejection Ratio. The ability of an instrument to reject an AC interference (usually of line frequency) across its input terminals. Usually expressed in decibels at a frequency. 常模抑制比仪器抑制其输入端子上交流干扰的能力(通常是线路频率)。通常表示为某个频率下的分贝值。
- Normal mode rejection ratio (NMRR) defines how well the instrument rejects or attenuates noise that appears between the HI and LO input terminals. 串模抑制比(NMRR)说明了仪器抑制或衰减高、低输入端之间出现的噪声的能力。
- normal mode rejection ratio (NMRR) 串模干扰抑制比
- normal mode rejection 共模抑制
- normal mode rejection ratio 归一模式抑制比
- Shut down database in normal mode. 在正常模式中关闭数据库。
- Its common mode rejection ratio(CMRR) was 65 dB at 100 kHz. 在100kHz时,该系统仍具有65dB的共模抑制比。
- Turn the mode dial to select normal mode. 转动模式盘至普通模式。
- Specifies that the control is in normal mode. 指定控件处于正常模式。
- Starts Windows in its normal mode. 在正常模式下启动Windows。
- I used Spb backupand restore in normal mode. 我是用SPB备份,然后在常规模式下恢复的。
- Under normal conditions, set the camera to the Normal mode. 通常相机设置在普通模式。
- Run Tzmove. Exe in normal mode against all other mailboxes. 在普通模式下对所有其他邮箱运行Tzmove.;exe。
- The default or normal mode for a Web page is browse. 网页的默认或正常模式为浏览。
- Common Mode Rejection Ratio: The ratio of the input voltage range to the peak-to-peak change in input offset voltage over this range. 共模抑制比,输入电压范围除以该范围内输入失调电压峰峰值。
- Reboot again in normal mode and check if your issue is solved. 再次重启后以正常模式登陆系统看看你的问题是否解决。
- Normal mode at the beginning, night vision mode at the later portion. 开首部份为正常模式,后半部则为夜视模式。
- Set the main switch selector to A and set the mode dial to normal mode. 把主选择开关设置在A(自动),同时把模式盘设置在普通模式。
- Based on the structure,an ultra-low voltage operational amplifier is designed,which provides a rail-to-rail common-mode input voltage range and output voltage swing,as well as a high common mode rejection ratio(CMRR). 基于此结构,实现了一种超低压运算放大器。 仿真分析表明,该运算放大器能够实现轨到轨(rail-to-rail)的共模输入电压范围和输出电压摆幅,以及较高的共模抑制比。
- Toggles the view between fullscreen mode and normal mode in Writer or Calc. Ctrl+Shift+J组合键 在 Writer 或 Calc 的全屏模式和正常模式之间切换视图。