您要查找的是不是：
- Carrier Synchronization Recovery for QPSK Signal with Number Controlled Oscillator 利用数控振荡器对QPSK信号的载波恢复
- number controlled oscillator 数控振荡器
- VCO? Voltage Controlled Oscillator? 电压控制的振荡器?
- This function is also called VCO (Voltage Controlled Oscillator). 此功能也称为压控振荡器（ VCO ） 。
- The design of a new CMOS digitally controlled oscillator (DCO) is proposed. 摘要提出了一种新型CMOS数控振荡器的设计。
- The analysis to the parameter of the NCO gives a way to design the more high powered numerically controlled oscillator. 通过对其参数进行分析为进一步设计高性能的数控振荡器指出了方向
- This machine is fully automatism number controlled, its operation is handy, andits cutting is exact. 本机全自动数字控制，操作简便，切割精确。
- A fully integrated low phase noise LC voltage controlled oscillator(VCO) is presented. 介绍了一种全集成的LC压控振荡器(VCO)的设计。
- In this thesis, we discuss the Voltage Controlled Oscillator (VCO) which has the largest jitter in PLL system. 在本论文中，我们讨论在锁相迴路系统之中，产生最大杂讯抖动的电压控制震荡器。
- The saddle steel number control horizontal shear the design of the production line. 关键词:横剪生产线,同步控制。
- In the meantime, the paper illustrates the design of the analog circuit in this system using the example of a voltage controlled oscillator. 同时，文章还以压控振荡器为例说明了在该系统中进行模拟电路的设计。
- The number control machine can process the cored and coreless spiral springs of many radice... 该机床能够加工出高精度、高质量的有芯或无芯的多股螺旋弹簧,满足了企业的需求。
- The key building blocks in the frequency synthesizer are the voltage controlled oscillator (VCO) and the high frequency divider circuit. 摘要:压控振荡器与除频器是频率合成器电路中，主要的电路之一。
- Effective Mach number control of cruise missile in large airspace is an urgent problem to he solved. 摘要在大空域内实现对于飞航导弹巡航马赫数的有效控制是一个迫切需要解决的问题。
- We use the flame cutting method. Most of the cutting is done by number control(N/C). 我们用火焰切割法。一般这些切割都是数控的。
- In recent years, increased demand for wireless communication systems motivates a growing interest in low phase noise voltage controlled oscillator (VCO). 近年来，随着无线通信系统的飞速发展，对低相位噪声压控振荡器(VCO)的需求也同益增加。
- Thus, the thesis will focus on the design of low phase noise voltage controlled oscillator (VCO) using off-chip cavity resonator and flip-chip technology. 所以，使用外接空腔共振器和覆晶技术来设计低相位杂讯的电压控制振荡器将是本论文的重点。
- The quenching layer with high hardness on the surface of number control machine-tools axle was obtained using laser surface treatment technology. 采用激光表面处理工艺,对数控机床主轴主要表面进行快速激光扫描,可获得高硬度的淬火硬化层。
- It is good for on-line octane number control and the recipe optimization of gasoline blending and economic effect has been obtained. 该系统在中石化天津炼油厂和洛阳炼油厂的实际应用中很好地解决了调合过程的辛烷值控制及优化问题,取得了较好的经济效益。
- The PLL part, made of PD, Loop Filter, Voltage Control Oscillator, is the key circuit of the system to produce steady and continuous frequency scanning signal. PLL锁相环路部分主要由鉴相器、环路滤波器、电压控制振荡器构成，产生稳定连续的频率扫描信号，它是本系统的关键电路。
