您要查找的是不是:
- off-set pattern socket wrench 弯脖套筒扳手
- Use socket wrench to remove regulator seat for replacement. 采用套筒扳手来拆卸调节阀阀座进行更换。
- If you follow the set pattern, you can do it well. 倘若你能如法炮制,也会做得很好。
- Mornings in our house always follow a set pattern. 在我们家,每天上午的生活总是遵循一种固定的模式。
- The murders all seem to follow a set pattern. 这些谋杀案似乎都为同一手法。
- Remove the screw-in elements by turning the element counterclockwise with an 1-1/2 inch socket wrench. 使用1.;5英寸的套筒扳手按反时针方向旋转拆卸加热元件上的螺丝。
- Are you willing if your day off set by your employer? 你是否愿意接受雇主所安排的休息日?
- Hand tools: Hex socket wrench: DIN911 “L” and “Z” and other non-standard hardware stampings. 手工具:内六角板手:DIN911和Z 字形;及其它非标的五金冲件!
- We can reverse this pattern using specially generated adapter molecules made of antibodies that snap onto the arms of the virus like sockets on a socket wrench. 我们可以将抗体制成转接分子,接在病毒的手臂上,就像套筒扳手的套筒一样,来扭转这种情况。
- A set of socket wrench with 32 pieces 32件套镀黑筒扳手
- This "line" has no set pattern and is usually formed in inconvenient places. 这个“队”没有固定的形式,常常是在不便的地方出现。
- Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye. 将衬套对准弹簧眼或U型钩眼,并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
- The murders all seem to follow a set pattern,ie occur in a similar way. 这些谋杀案似乎都为同一手法。
- Popularize CA and the setting pattern. 推广客户自动化系统及安装模式。
- Do you know how to set pattern of reduction or enlargement on copycat. 你知道怎么将复印机设定在缩印(放大)模式上吗?
- Open end or socket wrench. 英寸开口末端或套筒扳手。
- The ON or OFF settings for the SET options can be specified at several levels. 可以在多个级别上指定SET选项的ON或OFF设置。
- The murders all seem to follow a set pattern, ie occur in a similar way. 这些谋杀案似乎都为同一手法.
- But as she came off set she put on a mask, and proceeded to play conkers with a friend.Mask? 我们走近些,便看到了整个布景。
- Using a 9/16" socket wrench or nut driver, remove the four nuts from the #1 check studs (See fig. 1) Using two hands, place them at 12 o'clock and 6 o'clock, wiggle the check assembly free. 采用一把9/16英寸套筒扳手或螺母起子,用两手从1号止回阀柱头螺栓(参阅图1)上拆卸四个螺母,将其放置在12点和6点的位置,摆动拆卸止回阀总成。