您要查找的是不是：
- outer control limit 外控制界限
- NCL: No control limit is allowed. 不允许超出控制界限。
- NCL:No control limit is allowed. 不允许超出控制界限.
- NCL：No control limit is allowed. 不允许超出控制界限。
- outer control limits 外部控制限制,外部控制极限
- It analysis the remote data transfer requirement of outer control equipment , communication protocol of ink jet printer and bar code printer . 分析了外部控制设备的远程数据传输要求、喷码机和条形码打印机的通信协议。
- Variation beyond a control limit is evidence that assignable causes are affecting the process. 管制界线是从制程的资料来计算，不要和规格界线混淆。
- A control chart usually displays a lower control limit (LCL) and an upper control limit (UCL). 注 : 一般而言 , UCL与 LCL 的位置为平均值的正负三个标准差。
- This includes computing and interpreting capability indices, estimating the% failures, control limit calculations, etc. 包括计算和解释过程能力指数、计故障百分率、制限计算等。
- Frequency control limits the number of stations you can tune into. 频率控制限制了你们能调谐进的台站数量。
- This includes computing and interpreting capability indices, estimating the % failures, control limit calculations, etc. 包括计算和解释过程能力指数、估计故障百分率、控制限计算等。
- The statistical theories of hypothesis tests and the quality control limit of multivariate have been used to study the discriminance for drink quality stability. 同时,运用假设检验、多元质量控制界等统计理论研究了质量稳定性的判别方法。
- HACCP control tablet covered critical control points (CCP), evident hazard, critical control limit, monitoring measures, and error correction measures etc. HACCP控制表内容为关键控制点(CCP)、显著危害、关键控制限度、监控措施、纠偏措施等项目；
- There is no industry control limits for Copper and Lead in SnAgCu solder pot. 目前行业中没有用于SnAgCu焊料槽中铜和铅的控制极限。
- Dust the repair to prevent adhesion to outer cover. 清整修补处以防与外胎粘连。
- The hard outer portion or surface area of bread. 面包皮面包的表面区域的硬皮
- An outer coat of glaze on a piece of pottery. 外层釉陶器釉面上的第二层釉
- The outer walls of the building were painted blue. 这座建筑的外墙被漆成了蓝色。
- The recommended control limits for lead is max 1000 ppm, which is in accordance with the RoHs regulation. 铅的推荐控制极限最大为1000 ppm,该值符合RoHs规范。
- Upper and lower statistical control limits that define the constraints of common cause variations. 统计意义上的上限值和下限值,定义数据变量的容许范围。
