您要查找的是不是:
- output power measurement 输出功率测量
- The output power can never equal the input power, for there are always losses. 输出功率绝不能等于输入功率,因为总存在着损耗。
- Output power is stable, it can work in all weather. 输出功率稳定,可全天候工作;
- Adaptive output power minimizes interference. 可变的电源输出使干扰减小到最
- High output power, steady energy, adjustable, deep marking . 激光输出功率高,能量稳定,连接可调,深度雕刻。
- The span of wavelength is 0.6 nm,and output power is 8 dBm. 室温下;相关实验获得激光双波长间隔0.;6 nm;输出功率8 dBm。
- Power gain (18) The ration of output power to input power. 功率增益(18)輸出功率對輸入功率之比值。
- The Mechanism of Sudden-change of Output Power of TF CO2Laser[J]. 引用该论文 陈培峰;丘军林;龚志伟;唐宗化;陈义红;陈涛.
- A new method for power measurement of audio frequencies is introduced. 介绍了一种音频范围内功率测量的新方法。
- The output power can never equal the input power,for there are always losses. 输出功率绝不能等于输入功率,因为总存在着损耗。
- Stabile Output Power strengthens Lamp Lifespan and keep color temper coherence. 输出功率稳定,增强灯泡寿命,及色温一致性。
- Design of the Power Measurement System Base on Single-Chip Microcomputer for EV Storage Batteries. 基于单片机的EV动力蓄电池组电量计量系统的设计。
- The RF output power level is maximum for 13.5 VDC and minimum at 2 VDC. RF功率输出的是在13.;5V时候最大,而在2V时候最小。
- Optical potential mutual inductor is a new kind of senser used in electric power measurement system. 光电式电压互感器是一种用于电力测量系统的新型传感器。
- This method can be used to design reactive power measurement equipment for power computation and attemperment automatization in electric power system. 该方法可用于电力系统中电能计量、调度自动化等领域的无功功率测量装置的设计。
- This paper presents a numerical algorithm for power measurement in nonsinusoidal conditions and studies the application in Virtual Instrument. 介绍了一种可用于非正弦情况下功率测量的数字算法,并研究了在虚拟仪器中的应用。
- All solid-state transponders are under development with output power level lower by some 20-30 dB in the 4-6GHz band. 正在研制的全固态转发器在4-6千兆赫频段中的输出功率电平约低20-30分贝.
- DNB power measurement system gets the value and distribution of power before injecting the particles to TOKAMAK, so that the DNB system can be easily controlled. 而DNB功率测量是在DNB向TOKAMAK注入粒子前获取中性束流的功率大小及其分布情况,以便施行有效的控制。
- The ratio of output power to input power expressed as a percentage. This is generally measured under full load at nominal line voltage. 输出功率与输入功率之比的百分数。通常是在满负荷额定线电压下测定的。
- Using single-chip RF transceiver,the wireless serial communication function based on USB interface is introduced in electrical power measurement and control system. 在电力系统测控仪中采用单片射频收发芯片,增加基于USB口的无线串行通信功能。